Each apartment must have such a multifunctional piece of furniture as a wardrobe. He will save space in your home and arrange space. Not everyone can afford to buy it due to various circumstances. This is not a reason to refuse such a thing. A jack of all trades will not be difficult to make and assemble himself.
Of course, some knowledge will be required. There is nothing complicated at first glance. In addition, what joy and pride you will experience from the work done. After all, furniture assemblers charge a rather high price, and you can do it yourself.
Once implemented, the decision to buy a wardrobe, there is a need to correctly assemble it.
Content
To collect the purchased furniture, you need to follow the instructions for assembling the cabinet attached by the manufacturer. There are certain rules. By following them, you will collect any item with high quality and in a short time.
To assemble you need a screwdriver, screwdriver, Allen key, tape measure.
If you yourself are engaged in manufacturing, it will be much easier to assemble.
It is very important to follow the assembly sequence, otherwise you will have to disassemble and reassemble the cabinet in the correct sequence.
Currently, the production of furniture is mainly used chipboard. This is a fundamental principle. It is a wood chip coarse dispersion. Using hot pressing, it is shaped into a sheet. In the manufacture of plates using formaldehyde resins, they are an additional component. The difference from simple chipboard is to cover with a film made of paper and melamine resin. According to environmental indicators, it is better to use materials of class E1. Laminated chipboard plates have a good compaction, thanks to which the furniture made from them is strong and has a long service life.
Fastening rail on the cabinet door
If you think that this material has the same composition, then you are mistaken. According to the coating they are divided into veneered, rough and laminated. In terms of quality, they can be divided into three varieties: the first is using first-class sawdust (usually wood of the same breed). The surface is immaculate, not a single chip. The plate is decorated, laminated with film or veneer.Second grade - you can already see small defects. Veneering as it may or may not be. Third - there are already palpable defects. Such plates are not covered.
While the cabinet is not fully assembled, make sure that the attached parts do not tilt, as the fixings can be broken off.
In addition, chipboard is moisture-resistant and fire-resistant (withstand high temperatures). Most of them are made furniture case, but also used in the manufacture of partitions or used as interior decoration. It is worth mentioning that the chipboard thanks to its composition is excellent hold nails and screws.
In order to stiffen the closet, it is necessary to fix the back wall.
The basic "steps" of collecting cabinets of the "coupe" type are specified in the manual.
The furniture of these plates has many advantages compared with other materials.
Such furniture looks great in any interior.
Another important feature of chipboard - these plates have heat and sound insulation. Therefore, they can sheathe the walls of the room.
Make sure that the holes for the shelves and the attachment bars for the hanger match the holes of the opposite rack.
Also, if you started redevelopment of an apartment / house, knowing how to assemble a closet will help you quickly and easily solve the issue of moving this furniture.
Significant costs in the acquisition of the tool is not required. To assemble a kitchen set, a wardrobe or a hallway, you need to have the usual set of tools: screwdriver, hex key for confirmatte, screwdriver, various drills, bat for confirmatist, awl, pencil, tape measure, square, fine-grained emery paper, electric drill, office knife, iron, knife jamb, rubber mallet, retainer for parts.
The distance between opposite corners should be the same.
Assembling a wardrobe with your own hands is easy enough and everyone can do it just by using the instructions.
Guess what tool you need to assemble furniture is unrealistic. It depends on the project - difficult or not.
Now you need to install the wardrobe doors.
To open the wardrobe, you do not need to remove chairs or move other furniture.
First you need to prepare the room. The final outcome depends on how much time you spend on work. The important point is that nothing interferes. Make sure all materials and necessary tools are at hand.
As the depth limiter, you can use a plastic dowel 6 or 8, mounted on a drill.
Using the wardrobe, you visually separate the different areas in the room, for example, working from the rest area.
Furniture assembly at first glance seems like a simple matter. Many make mistakes, resulting in defects: the doors and sash are slightly adjacent, when opening the door can creak, because of a mismatch of the holes, misalignment of parts occurs, furniture does not reliably stand on the floor. To avoid this, it is necessary to follow certain rules and instructions.
Built-in wardrobes of various models, made of natural and artificial materials, are very popular in interior design.
Some models of wardrobes are able to transform under the room features: the presence of a corridor, recesses in the wall where the cabinet can be placed.
The assembly of the wardrobe is carried out strictly according to the scheme, vertically or horizontally. The second option is better, so you can prevent the parts from being skewed.If the height of the ceilings does not allow to raise the finished cabinet, then it is better to work in an upright position.
You will be able to assemble a wardrobe of the “coupe” type yourself if you follow the step-by-step instructions.
In this wardrobe, you put twice as much clothing at the same time not at the expense of the enormity of the furniture itself.
First of all, you need to attach the base and adjustable legs to the bottom. They are necessary if the floor is uneven. Next, proceed to the assembly of the case. We connect sidewalls with the basis. To make the structure strong, attach the intermediate rack and shelf. It is necessary that the sidewall is not tilted. After fasten the remaining parts, attach the cover. It is advisable not to nail the back wall, but to fasten it on the screws. At this stage we put the wardrobe in its place. We install drawers for the boxes, holders for shelves, bar for hangers. Check the drawers should slide out smoothly.
You need to familiarize yourself with all the details of the product (so as not to confuse anything during the assembly process and not have to start all over again), prepare the tools and the place where the assembly and installation will take place.
This job takes you a lot of time.
The next step is the installation of doors. First, fasten the guides, then fix the rail on the screws. We insert the doors, check that they open and close gently. Correct them if necessary. Last we stick the sealing brushes. Attach plugs to the holes of confirmatics.
As a rule, wardrobes, like all furniture, are assembled in the supine position of the cabinet.
Do not skew the details of the cabinet, keep even corners.
Summarizing, we can say that the assembly of the wardrobe is not such a difficult job. Your desire, skill and skill will do it easily.
After you do everything, be sure to check how the doors work (if they creak, move freely, etc.), how shelves and other parts are firmly fixed.
Be careful until the cabinet body is assembled and the back wall is installed, all fixtures can be easily broken.
We make a comfortable wardrobe with your own hands
Design and tips for choosing closets
Put the "mortgage" for the built-in wardrobe
Design wardrobe from A to Z
Corner built-in wardrobe in the interior
Variants of filling wardrobe
To collect the dream apartment
