How to make a stand for bottles of wine with their own hands from wood?

Storage is an interesting and responsible business, and if you are a wine gourmet, it is your duty to provide an aesthetic place for a noble drink. This is a wine shelf or stand.

Wine Storage Features

Wine requires certain storage conditions.

1. Temperature 10 - 15 degrees C. This is the ideal temperature range, which provides the ability to quickly serve the drink to the table. If you keep the wine at a high temperature, it begins to age: the aroma loses its former subtlety and sophistication. At low temperatures, the beverage stops ripening, the start of the oxidation process starts.
2. The optimum humidity is 60%, but the cork will not dry up and the bottle will not leak.

   Making such a stand with your own hands is quite simple.

3. The drink does not like direct sunlight. Light on the bottle leads to inevitable damage to the product. It is necessary to arrange a dark corner for storage.
4. Storage position - horizontal. This condition applies only to bottles that are sealed with natural cork stoppers so that they do not dry out. For synthetic caps the position of the bottle is not critical.
5. Lack of constant transportation, vibration. Wine needs rest, only then it will ripen as it should.

   It can be used not only in the apartment, but also for the wine cellar.

Newspaper bottle stand

Paper - material for the original stand for any kind of wine. This is a budget option for the design of which you will need: a newspaper, a ruler, a knife, paint, cardboard, skewers for a mini kebab, PVA.

The first stage of the work on the manufacture of a stand for storing wine, involves winding up pieces of newspaper pages on skewers. The edge of the wand should come out with a bevel. Next step: blanks are laid out in a row. Make sure they fit snugly together. Distribute the PVA glue evenly, the fixture should be fixed as accurately as possible.

After the product is completely dry, cut a polygon: 30 X 30 X 33 X 16. Glue the edges and fix them with a folding clip on both sides. When the construction is dry, cut a circle, the size of which will correspond to the bottom of the glued product.After fixing the bottom - the final stage of work: varnishing. Apply it at least in two layers and let dry.

Tin bottle wine bottle holder

A great option material material for wine bottles - can. Any tin cans of peas, beans, or corn will do.

Necessary materials:

• glue;
• spray paint;
• the cloth;
• canning knife;
• cardboard;
• 8-12 cans

Clear the jars from the labels: soak them in warm water beforehand, so the paper is removed from the surface easier. Leave clean cans to dry. Cut the bottom of the jar, and sharp edges must be carefully processed by bending them inside.

Paint application process

1. Put the jar on the stand and apply the paint on the inside.
2. Turn the can over and apply paint on the other side.
3. Wait until the product is completely dry.
4. Start painting the outer edges.
5. Let the work dry.

Assemble the structure. Determine how many cans you will have in the first row and apply superglue between them. Fix the work with clothespins. Add up additionally the planned number of cans, fasten and let dry.

Shelf for wine bottles made of cardboard do it yourself

Materials for work:

• scissors;
• two cylinders of thick paper with an axial hole (you can take the sleeve from paper towels);
• felt;
• Scotch;
• hot gun;
• glue;
• ruler.

Cut the cylinder with a stationery knife, find the middle and flatten it. The same must be done with the second cylinder. Glue the two cut cylinders together to make four cells. Cover all the edges of the stand with an adhesive tape for wine, it is better to take plumbing. Using a hot gun, glue down the work of the felt. Well press the fabric to the surface, and cut the excess pieces.

Balance Stand

Original table stand for a bottle of wine, which creates the effect of weightlessness. To create such a thing you need a wooden 20 mm. timber.

The length of the wooden trim should be 350 mm. And the width - 75 mm. One side of the beam, which will be located on the table, is cut at an angle of 60 degrees. The second is rounded. Stepping back from the rounded side of 80 mm., A circle with a diameter of 35 mm is cut.

Elegant hinged stand

Necessary materials:

• Plywood sheet 26 X 38 - 2 pcs.
• loops - 2 pcs.
• cord
• drill
• ruler, pencil
• sanding paper.

Measure the position of the circles on the plywood. In general, there should be twelve of them, six on each sheet. Sand the edges of the circles with sandpaper. The blank can be opened with varnish or painted in the desired color. Connect the sheets with loops. In order to stand for storing bottles of wine firmly stood on the surface, in the bottom of the plywood, drill holes for laces, which will fix the design.

Plywood and leather strips

Stand with leather materials look very unusual and elegant. For this model, you need two plywood: 50 to 50 cm.One, as the basis, will be a product on it, and on the second, there will be sleeves, about 45-50 cm long, each.

Leather strips 2-3 cm wide are fixed on two bushings that are parallel to each other at a distance of 15 cm.

Metal stand

Stands made of metal can be ordered from the master. Products made of metallic material have several advantages:

• solid appearance;
• reliability, durability and stability;
• author's design.

The holder of hooks or metal plates

This design is suitable for kitchen in country style. Hooks from metal are inserted into a large massive board. The board will be mounted on the wall vertically.

Wrought iron coasters

Expensive wines will look harmoniously in a forged frame. Masterfully constructed wrought iron will emphasize the status of a wine gourmet. This stand will attract the eye in the living room and in the kitchen.

The simplest model of the angular holder

An interesting storage option is the corner holder. To create this model of wine bottle stand with your own hands, you need a bar with the following parameters: length - 232 cm, width - 48 mm., Thickness - 70 mm. On the upper edge of the hole is cut with a diameter of 35 mm. The angle of the base should be equal to 125 degrees on the inside, and on the outside - 43.

Creative shelf of pipes and leather

You can build an original loft style of metallic copper tubes and pieces of leather. To do this, you will need to order a special-shaped pipe to which pre-processed pieces of leather are attached.

There are many options for creating your own wine storage. Selected shelf for a drink, will be a decoration for your home.

VIDEO: Stands for wine bottles made of wood.

50 variants of original wine bottle holders: