Mobile phone - a thing that should always be at hand. In the age of information technology it is difficult to argue. Sitting behind the wheel, cooking in the kitchen, doing handicrafts or other things when the hands are not free, a homemade and original stand for the phone will become a necessary accessory.
Imagine a modern person without a smartphone or phone is simply impossible.
Content
In order to know how to make a convenient stand for the phone, find out what material is used to make it.
Often, the owner who wants to have the phone is always at hand, I want to arrange it in a convenient way.
Modern smartphones have learned how to perform many different things, successfully replacing us with a watch, a voice recorder, a navigator, a player, and even a mobile cinema.
Note! When choosing a style of stand, consider not only your individual preferences, but also the design features of the room in which it will stand.
Before you order or create a stand for the phone with your own hands, determine the style.
The stand is a useful and convenient thing in everyday life.
The main thing is the strength of the structure.
If you are a creative person, then you will find in any subject of the makings of a phone holder.
Desk stand for a home phone should be not only comfortable, but also durable, stylish and fit well into the interior of the home.
For the machine it is very convenient to purchase a magnetic holder.
Installation principle: one side is attached with a magnet to the device, and the other to any accessible place of the car.
The device is quite strong and can hold the phone.
If suddenly in the office it was necessary to fix the phone in an upright position: here's how to quickly make a stand for the phone from improvised means with your own hands. The binder consists of two parts, a colored clip made of plastic or metal and a steel color clip. We take two Binders and fasten them together. We push one paperclip towards the phone.
Try to make a phone stand out of pencils.
Required materials: 6 pencils and four elastic bands. Putting three-dimensional triangle: tetrahedron. We fasten the ends of two pencils between each other and push the third between them.
Important! To build a structure, it is necessary to take pencils with rubber bands at the ends to avoid unnecessary slipping.
To make a model from bottles, prepare the material: any bottle of detergent, dishwashing or shampoo washing, scissors.
The bottom line: the work should resemble a pocket.
Important! The bottle size should be at least twice the length of the phone.
Cut the neck of the bottle and the front wall to the middle. This stand will be relevant for use during recharging. To do this, make a hole in the charger in the upper rear of the container. Fold the phone inward, and slide the charge first into the hole, then into the outlet.
Such a model can be painted, decorated with paper or fabric.
The option with a clip will require minimal costs and time.
Paperclip must be straightened in a straight line. We bend both edges of the clip upward, retreating 1 cm. Then we retreat 4 cm on both sides, this part of the structure should fit snugly to the table, as a support. The next step is to bend the clip in the middle upwards so that the previous bent parts remain flat, perpendicular to the table.
Place the resulting zigzag on the table, the work is done.
Put an old, unnecessary credit card in a vertical position in front of you. Back away from the edge of 1 cm and bend the edge towards you. The rest of the split in half, bend, but in the opposite direction.
Take a wide plate - the basis of the children's designer.
On the plate it is necessary to fix several bricks from the designer, in order to maintain the back panel of the phone, the angle at which it will be fixed will depend on the wall height. To fix the device on the sides, take a few more identical bricks and fix them on the base.
Insert the mobile device into the pocket where the cassette was once stored.
If an old cassette holder remains at home, it is very simple to create a holding structure: open it as far as possible so that the part with the pocket for the cassette remains in front and the top cover of the cassette holder is placed on the table.
Attention! Before you make a stand for your phone in the form of origami with your own hands out of paper, find and prepare your favorite schemes.
You can make a small phone stand with your own hands from the most simple materials.
Self-made stand for a smartphone made of cardboard.
In 5 seconds you can make a solid and strong stand for your phone.
Here's how to quickly and easily make a functional stand for the phone with your own hands from cardboard.
Stand for the phone made of paper using origami technique.
We take a wooden beam and make from it the workpiece, aligning and processing the edges. We attach the gadget and cut it to size. The corners must be rounded and sanded. Making a mark under the grooves, cut them. Take a chisel and carefully clean the cut grooves. Sand the work again before treating with oil.
Homemade and original stand ready.
Using conventional wire, twisting method in a variety of ways according to the schemes, you can create an original holder for the mobile. The main thing is that the weight of the device is evenly distributed on the homemade holder.
The advantage of this stand for the phone, made by hand, is that you can put the phone on it both horizontally and vertically.
Everyone knows why and when you need a stand for your phone, knowing the quick ways to create it from improvised means, you can always comfortably watch a movie or do household chores and chat with friends via video link.
Also, this stand can be used as a holder for tablets and e-books.
How to wash the blood off the couch: a list of effective and inexpensive ways
Bedspread as a bedroom decoration
How to cover the wood countertop in the kitchen? There are some interesting ideas!
How to make a decor of festive candles for a wedding?
Plaster partitions - what is it?
Anti-vibration stand for washing machine do it yourself
To collect the dream apartment
