How to fix a mirror in the house with your own hands

The mirror is a mysterious object. It seems that it reads thoughts, evaluates actions. He is credited with mystical properties. Do not recommend to look in a bad mood, during illness.

A mirror is an important element of the interior that exists in every house, used both for its intended purpose and as an item of decor.

A lot of beliefs about the astral spirit, sitting in the mirror, which sucks the person of positive energy. But in this article we’ll tell you not about superstitions, but about how attach a mirror.

Before you hang the mirror on the wall, you must carefully consider its location, height.

What is a mirror

In the manufacture used sheet glass, obtained from a mixture of sand, soda, limestone and other materials. They should contain the minimum amount of iron salts, giving the glass unnecessary shades.

A modern glass mirror is well known to everyone and is a sheet of polished glass, on one side of which a thin layer of metal called amalgam is deposited by spraying.

The initial mass is boiled, burned, molded sheet, polished, cut with diamond rollers. A metal coating is applied so that the surface reflects the light and is protected with varnish.

Aluminum is applied in the manufacture of budget mirrors, and silver - expensive.

When choosing a finished product, take into account the thickness of the glass, the quality of the coating of the back side - uniformity, no stains, other defects. They take into account the degree of distortion of the display - it happens that the mirror “fills” or “slim” - choose according to your taste.

In everyday life, it satisfies the physiological need of a person to see himself, is an element of the interior, allowing to change the perception of space.

Mount

It should be reliable, imperceptible, simple, minimally violating the finish of the walls. Mirrors are mounted on the walls in the following ways:

• WITHKobami with through fasteners that support the bottom, on the sides;
• Pby means of two screws, threads with gluing the substrate (like a panel);
• Haclay on the substrate;
• Pglue, liquid nails;
• ATgluing together with a tile;
• HThrough the holes of the product, by other means.

There are several ways of fixing mirrors; it is necessary to choose the best one based on the design, weight of the product, and the type of wall.

On a brick base

To install with the use of glue prepare the surface - if necessary, remove the wallpaper, carefully align the primer, followed by polishing. Be sure to clean, wipe with an alcohol solution.

Special glue intended for glasses with amalgam coating is used according to the instructions. They are applied to the surface not in a continuous array, but in parallel strips at regular intervals or in "stale" drops in a checkerboard pattern.

Then the product is tightly pressed, hold for about a day until full setting.

If, when deciding how to attach a mirror, this method is chosen, you need to remember what to remove or to outweigh.This is the last place of his "stay" - then you can only break, remove.

When using double-sided tape of large thickness, the surface is prepared. They glue it on the back side of the glass around the perimeter and the surface with vertical or horizontal stripes with a step of 5-7 cm. After that, they remove the protective film from it, press it into place.

All this can be easily done by hand.

The composition of liquid nails allows you to reliably hang a mirror, at the same time does not spoil a decorative surface of an installation site. The strength of this construction adhesive is much higher than that of PVA, and some modifications are equal to the characteristics of dowels.

The option is very convenient, since there is no need for tools and fasteners, you only need a suitable glue.

Important! Using scotch tape, install a product with an area of ​​only up to 1 m², the larger one can simply fall off later.

Important! Despite the guaranteed strength of adhesive materials, it is better to use a combination of the two methods when working.

The surface of the wall, released under the mirror, must be flat, otherwise the mount will be unreliable.

With the help of hardware usually make mounting mirror with ready-made holes. To do this, it is necessary to drill holes in the wall with the diameter of the used dowel 5 mm longer than the self-tapping screw, which is planned to be used. They are cleaned after drilling from dust, install dowels, attach the product, alternately wrap the screws. Be sure to close the decorative heads.

Hanging a mirror, you need to pay attention to the shape of the interior element.

On tiled flooring

A practical option is to install the mirror on top of the tile with adhesive tape or glue. You can also dismantle the tile in the area of ​​the intended placement of the product and glue it.

If the tile is already present on the wall, then you should not try to glue the mirror.

It is not worth worrying about the fact that the tile will crack if quality materials are used as the basis for the production.

Not a bad option - hang a mirrorusing hardware, performing several holes in the septum. To do this, you need to prepare a drill, screwdriver, special drill bits on tiles, mounting brackets, plastic dowels with screws.

It is necessary to drill holes in the tile and the base.

Then you can act in two ways:

1. ATMake holes in the wall and the product, fasten it with screws, after installing the dowels, special rubber gaskets;
2. PTo purchase, install the original mirror mounts in the form of brackets, which are fixed on the wall and support the product.

The number of fasteners is determined by the size, weight of the item. The larger the dimensions, the more clips are required.

On drywall

Drywall - not the most durable finishing material, cracks, crumbles. The technology of mounting the mirror on the wall is determined by its mass. If less than 10 kg - apply liquid nails or double-sided tape.

After installation, it is required to withstand the required setting time, sometimes up to 24 hours.

For mounting various accessories on this basis, use special dowels - “butterflies” that can withstand up to 10 kg. Installed in pre-prepared holes (by their number in the product).

"Butterfly" is fixed for a drywall plate, securely holds the screw.

For products that do not have holes, the stores offer special fixtures for the mirror when mounted to the wall, including brackets, profiles, fasteners.

The system is suspended from drywall, the product is embedded in it.

Assembly work

You can use the services of a workshop that has the appropriate equipment. When self-manufacturing use drill, diamond drill.

Installing a mirror on the wall in the bathroom is not very difficult.

It is only important to adhere to a certain algorithm of actions.

First degrease the surface with alcohol.The hole is performed at a distance of at least 30 mm from the edge. The tool is oriented perpendicular to the plane. Drilling is made, starting with a low, then at medium speed.

High tool turns, pressure, work without cooling are unacceptable!

It is practical to arrange a bezel of plasticine around the drilling zone and pour water. The openings are cleaned with sandpaper.

How to fix a mirror on a wall is a quite solvable task, there are many ways of fixing it.

Each has its own characteristics, the choice is carried out taking into account:

• Prooms (bathroom, living room, hallway - different in terms of humidity and air velocity);
• TOconstructions (presence of a frame, substrate, shelf, hangers);
• Rsizes and masses;
• Hopenings;
• Mmaterial wall;
• Dthe degradation of drilling with a violation of the finish;
• WITHthe falsity of the elimination of defects after removal of the product.

Light mirror on a flat wall can be glued with liquid nails, treating the joints with sealant.

How to hang a mirror on the wall and not to break it - the most important issue for the bathroom, where each hole can spoil the expensive finish, but insignificant for the concrete, brick or plasterboard walls, on which drilling traces are easily, imperceptibly eliminated.

It should be remembered that the glue hardens very quickly, so the mirror must be leveled as quickly as possible.

If there are holes in the product, it is attached to the drywall with a “butterfly” type device, and an ordinary dowel is used when hanging on a brick wall.In the absence of holes, glueing or adhesive tape is equally applicable, and reliable special brackets such as staples.

Installation conditions and installation methods are many - for each situation there is a different option.

VIDEO: We hang a mirror in the bathroom.

Mirrors in the interior of the house - 50 photo ideas: