How to drill a mirror at home

There are times when you need to move the old mirror or hang a new one. For this you need to make a hole in it. It is necessary to make it so that it does not crack, does not burst, in one word, remains whole.

In some cases it is necessary to make a hole in the mirror to hang it on the wall or for other purposes.

In essence, the mirror is the same as glass, only one side has a special composition. To make a hole in the house, the masters use the same methods if they worked with glass.

This material is very fragile, so when drilling a mirror at home you need to be very careful and attentive so as not to damage it.

Of course, at home such drilling is performed infrequently. But if the need arises, most people are confused and do not know how to properly do it, because the material is quite fragile.

In fact, a mirror is a glass that is covered on one side with a special compound.

In fact, everything is quite primitive, any master will cope. You need to follow the rules and carefully carry out the work.

Therefore, to make a hole in it, you can use the same methods as when working with glass.

Glass (as well as a mirror) is a very fragile material, so drilling skills in concrete or metal are not applicable.

Method of drilling holes in the glass and tile mounting

Let's see what kind of drill is needed for this procedure. Tools designed for woodwork or metalwork will not work, glass may burst. To drill a mirror or glass, there are special drills.

One of them has the shape of an arrow and a special sputtering that does not penetrate, but slowly scrapes off layers of material.

If a hole drill is used for drilling glass or a mirror, then at a very low speed in the center of the future hole, make a slight recess and stop.

Round holes can also be made, but you need a special machine. The drill brass has a diamond coating. Using it, you need to cool glass turpentine or water. A tubular drill is quite simple. to drill mirror, glass, tile. On its edges contains a diamond plating. It is used in cases where you need a large hole, cooling is also required.

With proper drilling, this drill can drill up to 100 linear millimeters.

Tubular drills are inexpensive, sold in any hardware store, besides they have a wide selection of diameters.

There are some equally effective methods that will help to make holes in the glass or mirror:

• In vinegar you need to dissolve aluminum alum or use a mixture of camphor and turpentine.

Process this material with this mixture and can be drilled.

• The drill may well replace copper wire. At the place where there will be a hole, put a mass of emery powder, camphor and turpentine. The powder is better to take coarse.

Glass is easy to drill a piece of copper wire with a drill or fastening on a lathe.

• With a glass cutter, you will make a significant armhole or hole of a peculiar type.
  

Mark up with a marker and do the work gently, without excessive pressure.

The sharp edges are cleaned with a file or sandpaper under running water.

If you use a drill, you need one in which speeds can be adjusted. This condition is necessary because drilling held at low speeds.

Remember that in no case is it possible to drill toughened glass; it will burst.

The tempered glass has the processed edges, small defects, dents on a surface, remaining from shafts in an oven.

If you are not satisfied with the above methods, apply ordinary sand. The surface is degreased with gasoline. The right place sprinkled with wet sand and make a funnel in it. Tin or lead is poured into the hole, but first they need to be heated. After some time, the sand can be removed and removed the frozen mass.

A smooth through hole appears in the glass.

Required materials and tools

Before you begin, you need to prepare everything that may be needed. From materials required turpentine, clay, acetone or gasoline.Prepare a drill from tools, a screwdriver, a diamond-coated drill, gloves and eye protection glasses can be used.

Drills for glass with a diamond coating.

Drill and goggles.

The drilling process: step by step instructions

It is important to remember that tempered glass or reinforced better attributed to the workshop. At home, this work is not recommended!

Both the diamond drill and the glass itself are afraid of overheating, so periodically it is necessary to cool the drilling site with water.

It is not necessary to pour a lot, it is enough that there is a puddle on the surface of the material, which covers the future hole.

You can practice on the piece glasswhich you do not need. Put on safety equipment before starting to drill. First of all we prepare the material - we treat the surface with alcohol, acetone or turpentine. Give a good dry. We put a mirror or glass on a wooden flat surface. Choose a place, make a markup, draw a square, pour a little turpentine - this procedure will help avoid cracks.

When working, do not press hard on the tool, keep the average revolutions, and every few seconds lift the drill so that the water moistens and cools the edges of the hole and the drill itself.

Pressure on the drill is not allowed, even if it seems to you that it is idling. When drilling, keep a pause of 5-10 seconds. At such times, cool the surface - water with plenty of water. This must be done!

You can make a ring of putty or plasticine, fix around the hole and pour water.

For competent drilling Hold the tool vertically so that a right angle is formed. The drill will not slip off if you take a piece of wood or plastic, make a hole in it and attach it to the surface. At the final stage, the mirror must be turned and drilling completed on the other hand - there will be no cracks.

The interval from edge to hole should be 2-2.5 cm.

Then work the hole with sandpaper to prevent cuts. This description is suitable for drilling ceramic tiles.

Almost everyone can drill a mirror at home, but it is likely that it will crack during operation.

In one hand, hold the drill, and in the other, a very damp cloth. As soon as the hole is drilled, immediately wet the wall.

From the instructions it is clear that to drill mirror or glass at home can any man. But if you are not confident in yourself and doubts overcome you, then it is better to turn to specialists.

VIDEO: Drilling a hole in a mirror.

Mirrors in the interior - 50 photo ideas: