How to hang a bathroom mirror on the tile

Do not imagine our home without a mirror. It is in almost every room. We do not pay attention to how it is attached, until the need arises to hang it on its own after repair or at some other place. This is where difficulties arise, since the walls are not always the same, and the mass of the mirror is always different. This job will be very difficult when you mount the mirror in the bathroom, as well as on the plasterboard wall.

Can't imagine our home without a mirror.

What are wall designs

If you have conceived repairs in the bathroom, you first need to decide what you will do with the walls. Today there is a wide variety of finishing materials. Of course, you need to remember qualities such as good quality, hygiene, moisture resistance, basic care, as well as resistance to various detergents and temperature changes.

This is where difficulties arise, since the walls are not always the same, and the mass of the mirror is always different.

The main thing is that you create a cozy, unique interior in the bathroom.

What materials can be used as a finish

Ways of decoration may be different.

Attention! Whichever option you choose, remember that the material meets all the necessary requirements for bathrooms.

Sticking or drilling?

How to hang a mirror in the bathroom? Today, there are several ways to mount a mirror coating on a wall. Any of them has its own advantages or any flaws.

For greater reliability, an adhesive should be used.

Only small mirrors with an area of ​​one square meter are glued to the tape, not more. Such a fastening system is extremely unreliable - the mirror may fall off after a certain period of time. But the simplest. Absolutely anyone can handle it.

On the wall we make a markup, preferably with a water marker.

If mounted on a special glue, the mirror will hold very tightly. But when you want to remove it, it will be extremely problematic to do so. You need to use glue for gluing mirrors, say, polyurethane "Soudal", silicone, hybrid - for all types of mirrors. Very carefully approach the choice of glue, as the poor fit can spoil the amalgam.

If you have conceived repairs in the bathroom, you first need to decide what you will do with the walls.

Using screws and special fasteners for work, in the future, if you are planning to make repairs or simply move, change the mirror, it will be quite easy to remove and hang back. The time-consuming point of this mounting option is to drill holes in the mirror and in the wall.

It is necessary to use a waterproof tape that can withstand high humidity and temperature fluctuations.

Which option you choose is up to you.

Today there is a wide variety of finishing materials.

Necessary materials

From the materials for the work we need: a mirror, “liquid nails”, glue for gluing tiles, mirrors, a degreasing agent for tile processing, a U-shaped galvanized profile, moisture resistant plasterboard (if you decided to fix the mirror surface on the gypsum board), self-tapping screws, screws , dowels, individual mount for a mirror, rubber gaskets, adhesive tape.

Today, there are several ways to mount a mirror coating on a wall.

Required Tools

Of the tools will be needed: a drill or a hammer drill, a screwdriver or screwdrivers, embedded parts, construction level, diamond drill bit, drill bits for concrete, a fixture for fixing a mirror - a bracket, a hammer, emery paper.

Only small mirrors with an area of ​​one square meter are glued to the tape, not more.

The first method: the use of adhesive

Let's look at some options for how to hang a mirror in the bathroom. To cope with this work, you must have a certain skill. Such a case is worth a responsible approach. First you need to choose a suitable place so that there is enough light, the mirror should hang at a certain distance from the floor.

Need a U-shaped galvanized profile and moisture-resistant drywall.

This option implies lower costs. It is quite thoroughly attached to the plane. Today in shops many various gluing agents are on sale.You need to choose the glue carefully so that it is suitable for this kind of work. Before use, you must read the instructions.

If mounted on a special glue, the mirror will hold very tightly.

Adhesive is applied on the reverse side of the mirror with strips arranged parallel to each other, through the same distance. The tile before work is processed by degreasing agent. We press the mirror to the wall, fix it until dry. This method is suitable for small mirrors.

For more "prominent" sizes it is worth applying an auxiliary fastening, for example, "liquid nails" and drywall.

For more "prominent" sizes it is worth applying an auxiliary fastening, for example, "liquid nails" and drywall. Need a U-shaped galvanized profile and moisture-resistant drywall. It is usually green. First of all, four profiles should be attached to the wall dowels. Gently drill the tile with a diamond drill. Then we fasten a sheet of drywall onto screws, the more there are, the stronger the construction will be. Apply the "liquid nails" on the mirror and sticking to the GCR.

Very carefully approach the choice of glue, as the poor fit can spoil the amalgam.

The second way: the use of double-sided tape

This method does not take much time. It is necessary to use a waterproof tape that can withstand high humidity and temperature fluctuations. As in the first method, wash and clean the tile with a degreasing agent, also clean the back side of the mirror, let it dry. On the wall we make a markup, preferably with a water marker. On the mirror surface through the same distance we glue the adhesive tape, putting strips parallel to each other. With adhesive tape, remove the protective coating and fix it on the wall. For greater reliability, an adhesive should be used.

Using screws and special fasteners for work, in the future, if you are planning to make repairs or simply move, change the mirror, it will be quite easy to remove and hang back.

The third way: the use of hardware or other fasteners

This method is used when there are already holes in the structure. Now prepare them in the wall, insert the dowels and tighten the screws. To avoid deformation of the mirror, rubber gaskets will be needed. They are located on both sides of the glass. In order not to accumulate moisture, between the wall and the mirror you need to put rubber or plastic.

The method is suitable for small mirrors.

If you purchased a mirror, but there was no attachment attached to it, you can buy it at the point of sale. These are metal brackets, they are attached to the wall and a mirror is hung on them.

Which option you choose is up to you.

As a rule, the mirror coating is sold without ready-made holes. Then they need to drill yourself. To do this, use drills specifically designed for tile and glass. When drilling with conventional drills, the surface may crack. First of all, mark the place with a glass cutter. Then we build a side of plasticine, fix a hole around the place of the future, pour water into it so that the plane is cooled at the time of drilling.

The tile before work is processed by degreasing agent.

We begin work with a diamond drill. The speed should be the smallest so that there is no overheating, you also do not need to press on the mirror plane. The finished hole is treated with fine grit sandpaper. Then we make holes in the wall, fasten the fasteners and hang the mirror.

We press the mirror to the wall, fix it until dry.

This method is probably time-consuming, but it will also hold thoroughly. If you want to change the mirror, there will be no difficulty here, you should unscrew the screws and remove the mirror.

To cope with this work, you must have a certain skill.

The final stage - decorating

The bathroom is the place where we wash, every morning we clean up, we wash. A place that performs certain functions must necessarily be attractive. Today, designers come up with a variety of decorative elements, but decorating made independently is especially fashionable. All beauty can be made from improvised means. This will help save the budget. Just need to remember that the decorations were moisture-proof.

First you need to choose a suitable place so that there is enough light, the mirror should hang at a certain distance from the floor.

Decorating is a rather laborious job. You will need patience, concentration, diligence. At the end of the work you will become the owner of the original piece of furniture.

Today in shops many various gluing agents are on sale.

If you have a mirror without a frame, you can purchase it or make it yourself. It can be round, rectangular, square or some unusual shape. You can decorate it in different ways - paint it, cover it with moisture-proof fabric, lay it out with beads, glass beads, shells or other materials, even pasta. Upon completion of all work, the surface must be varnished - this will protect from moisture. It is possible to fix decorative elements both on “liquid nails” and on any waterproof glue.

Before use, you must read the instructions.

Ways of decoration may be different. To do this, you can use a cloth, apply decoupage, paint, lay out a mosaic. What will you decorate - it's up to you. The main thing is that you create a cozy, unique interior in the bathroom.

Adhesive is applied on the reverse side of the mirror with strips arranged parallel to each other, through the same distance.

VIDEO:How to hang a mirror

50 photo ideas how to hang a mirror in the bathroom