Bedding for dolls

If your daughter loves playing with dolls, please with her bedding for dolls. Such a nice and useful addition can be made with your own hands. So you will please your daughter, instill in her housekeeping and responsibility.

To make such a kit is not difficult and not expensive, but how much joy will the baby have

From what to sew

Since the dimensions of bed linen for the doll are not large, it is not difficult to find the material that serves as the basis for tailoring. These can be old towels or any things. To choose the right, decide what material is needed. If you sew a pillowcase, it is better to take a natural fabric, taken from old things. For sheets, duvet cover suitable towel.

In general, sewing such linen accepts any old things that can be used to cut.

Simple puppet set for crib of fabric pieces

Basic sewing rules

After choosing the old things that will become the basis, you need to make patterns and get down to business. For this you need to know the basic rules:

• be sure to cover the edges of the cut tissue;
• Flush products only inside out;
• pick up thin threads №40;
• make patterns on height of a baby doll, a bed.

We present the size table of the most popular types of dolls.

Using this table, draw the pattern, adding to it another 3 cm on the step seam.

Now more about the different details of textiles.

Beautiful embroidered bed linen for handmade dolls

How to sew a pillowcase

We choose the desired size of the fabric, cut out two parts of the fabric, sew around the perimeter, leaving about 10 cm of the connector

Fill the future pillow with balls

This is one of the most difficult parts. The snag, above all, is in small proportions. The doll pillowcase will be pretty small, so you need to work carefully.

We sew the connector with hidden stitches and get a small pad

We will sew a standard pillowcase with inversion. Measure the square (rectangle) of the desired parameters, make the appropriate marks.

Centering the picture we cut out the fabric for the pillowcase, take the ryushechku or band, stepping back from the border of the ornament 1-2 mm tweaking it

From above, we impose a future smell about 30% of the width of the cushion, bending the edge

We turn over and focusing on the contour we work on the part, retreating 1-2 mm

We sew on the wrong side of the pillowcase also around the perimeter, focusing on the contour of the ornament, first bend the lower section

Next, put a mark similar to the first size. The third segment should be equal to 1/3 of the total measurements.

Surround, sew over, sew, sew beautiful buttons and make loops for them

Now cut the cut, sew the gap (which was 1/3 of the pillow) to the main part.Then fold the resulting rectangle (or square) in half, sew from both sides. The pillow case is ready.

The sheet

We make a sheet, we add 5 cm on each side of the mattress, bend the edges

This subject matter is the easiest. Sheets should be 2-3 cm more doll bed (depending on the height of the bed).

You just have to measure the dimensions of the bed, cut a rectangle of the appropriate size, hem it around the perimeter.

Optionally, you can add ruffles, fringe.

Do I need a duvet cover

We select the fabric for the manufacture of patchwork

This often raises the question about the duvet cover. Do I need him? The answer depends on the blanket available. If it is tight, the cover will be useful. If thin, this part of the textile is superfluous.

We cut out the central part of the blanket - some beautiful block, embroidery, an interesting fragment.

Edging with stripes around the perimeter of the picture

It is best to get a winter blanket, making a cover on it, and a summer one that does not require this detail.

Duvet cover must match the size of the blanket. Measure it, make a pattern according to the measurements. It is best to make a case with a lock on the side or a slot on one side.

Cut a strip from another fabric, make two squares and cut them diagonally.

Along the perimeter we attach the allowance of 3 mm

Align the edges, assuming a 7 mm stock.

Measure out two identical rectangles. Bend in half, sew two sides. Leave the third one swept over or sew the lock there.

We take two squares from another fabric with a side of 25 cm, cut it diagonally, stitch them along the sides

We sew a very thin lace braid around the perimeter

We take a very thin synthetic winterizer to fill the blanket and make a “sandwich” of fabrics

We make a stitch on all the contours and an additional seam next to the lace braid

Now you can sew doll bedding yourself. If desired, they can be decorated with additional elements.

We come up with options for stitches of different fragments of the blanket

Along the contours do the edging line that will create a bulge

It can be stripes, stickers, embroidery, stones, rhinestones - everything that is in the house. Do not forget to consult with the child, what kind of decoration he would like more.

Beautiful ready-made bedding set for a self-made doll bed

Video: How to make doll bedding \ How to make a doll bedding

50 ideas for inspiration - the best do-it-yourself kits: