Table with glass table top do it yourself

Glassware has always had a special elegance, beauty, refreshed any interior shine and lightness. A glass table with a properly selected underframe is weightless, this is especially important in small rooms. However, the high price of glass furniture often stops the consumer from purchasing it. You can solve this problem by making a glass table with your own hands. Approaching the process with accuracy and responsibility, strictly following the instructions and expert advice, the result will be a wonderful and unique piece of furniture.

Glassware has always had a special elegance, beauty, refreshed any interior shine and lightness.

Determine the design

Before you begin the process of making a glass table and buy the necessary materials, you need to carefully consider how it should look, decide in which place the room will stand, how it will be used.

You can solve this problem by making a glass table with your own hands.

According to the functional characteristics, it can be:

• magazine
• written
• kitchen
• and even computer.

A glass table with a properly selected underframe is weightless, this is especially important in small rooms.

By design, they are divided into:

• traveling,
• transformers,
• sliding,
• with an additional shelf.

Before you begin the process of making a glass table and buy the necessary materials, you need to carefully consider how it should look.

Depending on the shape of the glass countertops, they can be:

• rectangular and square,
• round and oval,
• segmental (angular),
• non-standard.

Choosing a basement (whether it is just legs or a finished design with a frame for the surface of glass).

When choosing a sub-base (whether it’s just legs or a finished design with a frame for a glass surface), special attention should be paid to the overall interior of the room where the table will stand:

• metal legs are ideal for high-tech style;
• forged or wooden legs in a pair with glass belong to the classic or loft style, and they are suitable for any color scheme of the interior;
• if the basic idea of ​​the room is made in the style of minimalism, the choice can be stopped on a base of glass or thin metal, while the table itself is better equipped with wheels so that at any moment it can be moved to the right place;
• in the case of a rustic interior, you can use coarse wooden materials (logs, raw bars), and oval or round tabletops would look best in such a pair.

Particular attention should be paid to the overall interior of the room in which there will be a table.

Advantages, disadvantages

The glass table has many positive qualities.

1. High aesthetics and versatility allows you to use such an item in almost any room with different design solutions.In addition, a wide range of glass products allows you to choose the ideal countertop (whether it is simple transparent glass or matte, white or colored).
2. Glass products are environmentally friendly, do not absorb odors, fats, paints that are resistant to chemical materials. These features are perfect for the kitchen.
3. It is very practical: caring for the glass implies regular washing or wiping, even without the help of detergents.
4. The technology used in the manufacture of glass makes this piece of furniture very resistant to impacts, chips, scratches, and a special film will hold all the fragments even after breaking, eliminating the risk of injury.

Along with a lot of positive qualities, there are also negative sides of a glass table top:

1. Glass is not able to absorb sounds, so when in contact with other objects a lot of noise is produced. To solve this problem, you can use special stands. But in no case can one lay a glass table, since it will completely lose its main role - transparency and weightlessness.
2. On the glass, with its high reflectivity, you can see any, even the most insignificant, marks and stains. To solve this problem, it is enough to choose the right cloths for polishing tabletops and cleaning products, place the table away from light sources, or choose a matte type of glass.
3. If the manufacture used more affordable plain glass, there is a risk of scratching, such a surface can easily break.

Wooden legs in a pair with glass belong to the classic or loft style, and they suit any color scheme of the interior.

Tools and materials

The main stage of preparation involves the choice of how to make a glass table with your own hands. An important role in this is played not only by the desired result, but also by what material is the easiest to work with. For the beginner master, metal chrome legs are best suited.

Glass products are environmentally friendly, do not absorb odors, fats, paints that are resistant to chemical materials.

To make a glass table with your own hands you will need:

• a sheet of ordinary or special glass, the thickness of which will be at least 6 mm .;
• 4 legs;
• 4 suction cups for legs;
• construction adhesive for bonding glass with metal that has transparency after drying;
• emery paper and glass polishing paste;
• vegetable oil and gasoline (acetone);
• Chipboard or plywood to ensure smooth laying of the glass sheet.

It is very practical: caring for the glass implies regular washing or wiping, even without the help of detergents.

To work you will need the following tools and available materials:

• metal ruler,
• marker or pencil
• glass cutter (diamond or roller),
• goggles and gloves for protection during work,
• rubber mallet
• drill and grinder,
• file or emery board,
• felt circle (for polishing the edge with a paste).

These features are perfect for the kitchen.

Glass cutting and processing

It is not so difficult to make a table with a glass table top with your own hands, the main stage of this process is cutting the table top from a sheet of glass of the desired shape and processing its edges.

The technology used in the manufacture of glass, makes this piece of furniture very resistant to shocks, chips.

To ensure a high-quality result of work, the glass sheet must lie on a flat surface (chipboard, plywood), it must also be thoroughly washed and polished. The presence of even the smallest particles of dirt can lead to the formation of chips and uneven cuts.

Special film will hold all the fragments even after breaking, eliminating the risk of injury.

With the help of a pencil on the bottom side of the glass, it is necessary to make a marking, on top of the line a thin metal line is laid.Using a glass cutter, you need to take into account that the roller, unlike the diamond one, needs to be pressed to the glass more strongly by smearing it with vegetable oil. For people who are not familiar with a tool such as a glass cutter, it is better to practice on a similar material beforehand, to make several test headings using cheaper materials.

Along with a lot of positive qualities, there are also negative sides of a glass table top.

From what type of glass cutter is available, the technique of working with it differs:

• using a diamond glass cutter, you need to make one right and sharp movement, eliminating stops and repetitions, without the use of special pressing pressure;
• If a roller glass cutter is used, the pressure should be at least 2 kg. You can make a cut several times on the same glass section, if the result was not satisfactory before.

Next you need to gently tap the line of cut with a rubber hammer and separate the cut edges of the glass. In order to avoid injuries, all manipulations must be done with gloves.

Glass is not able to absorb sounds, so when in contact with other objects a lot of noise is produced.

The next stage is processing the edges of the glass blank. To do this, first use a file (remove the largest irregularities), grinders and grinding skins, to protect against eye contact with dust from the glass wear building glasses. Gradually it is necessary to clean the sharp edges, starting with the largest, ending with the smallest sandpaper. At this stage, you can not only protect the edges of the glass, but also give them the necessary shape:

But in no case can one lay a glass table, since it will completely lose its main role - transparency and weightlessness.

On the glass, with its high reflectivity, you can see any, even the most insignificant, marks and stains.

At the very end, the edges of the glass are polished with a paste and a felt circle.

The easiest way to do a rectangular or square surface. For the manufacture of oval or non-standard glass worktops, you must first prepare a layout (template), and for cutting a round worktop there is a special circular-shaped glass cutter.

To solve this problem, it is enough to choose the right cloth for polishing tabletops and cleaning products.

Assembly, decoration and elimination of defects

To make the glass table with your own hands tidy and meet the basic requirements, the assembly process must be taken very responsibly.

Place the table away from light sources or select a matte glass.

Turn the finished part over and mark the places where the legs will be (7-10 cm from the edge and about 13 cm from the corner). Next, in the upper part of the legs, make holes for suckers, apply glue and fix them. Often, the action of suction cups is enough to securely hold the table top, but it is better to fix the fasteners by applying glue on them.

If the manufacture used more affordable plain glass, there is a risk of scratching, such a surface can easily break.

To make the finished table look neat, it is important to choose the right glue and not to overdo it with its quantity. After drying, it should become completely transparent and not peeking through the surface of the glass.

After the glue dries, the glass table is ready with its own hands, it only needs to be wiped and installed in the place intended for it.

The presence of even the smallest particles of dirt can lead to the formation of chips and uneven cuts.

However, at this stage, many are thinking about how to make the glass table with their own hands the most unique, what methods of decoration and decoration exist?

With the help of a pencil on the bottom side of the glass, it is necessary to make a marking, on top of the line a thin metal line is laid.

The easiest way to decorate the surface of the tabletop is by attaching a special adhesive film with various patterns to its lower part. For creative people, an excellent solution would be to use stained glass technology, which allows you to apply the desired image to the surface using stencils and paints.

Using glue and various glass and plastic stones and rhinestones, fastening them to the surface, you can get a bright and glamorous interior item.

The main stage of this process is cutting the tabletop from a sheet of glass of the desired shape and processing its edges.

Matte patterns on the surface of glass are very popular in any interior. They are applied using a sandblasting method or etching technology. Both methods involve the use of a stencil and create a matte pattern on the surface of the tabletop by mechanical or chemical means.

If you want to make a table with glass with your own hands with a simple transparent surface, without additional decorations and drawings, you can improve it by installing an additional shelf. The process of making such a piece of furniture is similar to that described, only instead of the usual legs, special ones are needed - with a stud, which will be pre-drilled holes in a glass shelf, and intermediate washers. For reliability of fastening use transparent construction glue.

For the beginner master, metal chrome legs are best suited.

It is important to preserve the novelty of the appearance, which is quite difficult if the surface is glossy. During operation, small scratches and scratches appear on it, which can be removed with the help of GOI paste. It is necessary to grind and use as a polish, cleaning the irregularities of the glass. In addition to this paste, you can find polishes with diamond particles.

Showing imagination this piece of furniture can be turned into a work of art.

Adhering to the sequence of actions, using high-quality materials and taking into account technological advice, everyone can make a glass table with their own hands, and by showing imagination this interior item can be turned into a work of art.

The main stage of preparation involves the choice of how to make a glass table with your own hands.

VIDEO: DIY glass table.

50 photo ideas design glass table do it yourself