Breakfast in bed is a pleasant surprise for a loved one who cannot be realized without bedside table. This item helps to make such surprises with enviable periodicity and competent complements the interior of any home.
If you have never received breakfast in bed - think about it, maybe you just do not have an over-bed table?
Today, breakfast tables in a wide variety are represented in almost every furniture store. Manufacturers make such an accessory from different materials. However, a surprise for a loved one or a loved one will be much more pleasant if you make breakfast table in bed do it yourself.
In this article we will consider all the features of this process.
Content
Markets and furniture stores are full of tables for the bed, it is easy to choose a similar accessory for the house. Why do homemade products have more advantages?
The design of the bedside table is quite simple - a table top enclosed in a border edging and legs.
Not everyone can boast of furniture made with his own hands.
Breakfast in bed is not only romantic, but also very convenient, especially for those people who find it difficult to get up in the morning without drinking a cup of hot coffee. In order not to leave the crumbs or spill coffee directly on the bed, it is better to use a comfortable bedside table.
It is quite simple to make such a piece of furniture if you strictly follow the instructions and listen to professional recommendations.
To make the table yourself, you must definitely decide on a few key points. Consider them in more detail:
The table-top should have small sides and handles.
Folding legs make the table more versatile and more mobile, it can be folded into an ordinary tray.
With all these aspects you need to decide in advance.
Plastic products are cheap and affordable.
Comparative characteristics of the listed materials are presented in the table.
| Specifications | Materials | ||
| Natural wood | Glass | Plastic | |
| Aesthetics | + | + | + |
| Practicality | + | + | – |
| Durability | + | + | – |
| Cost of | high | high | low |
| Ease of manufacture | +/- | – | + |
In this article we will look at the process of making a simple model of a table from a furniture board.
This is a very reliable, beautiful and relatively inexpensive material.
Before starting work, you need to prepare the following materials and tools:
Having prepared these materials and assembled the tabletop using the instructions, you can get a neat product with a height of 260 mm.
To make the process of making and assembling the table quickly and easily, you must first prepare all the wooden blanks. First you need to cut the furniture board.
It will have the shape of a regular rectangle with sides of 600 and 400.
The thickness of the shield should reach eighteen. When the shield is ready, all its sides can be cleaned with sandpaper. Then you can begin to manufacture limiters. For the front and back side, you need to cut the side length of 620, and for the side - length 400.
The height of the limiters should slightly exceed the thickness of the furniture board.
Next, cut out the components of the box - four blanks.
We cut the workpiece with a hacksaw and the body.
And finally proceed to cutting the legs. It will take four blanks. The length of each - 245 mm.
Making legs.
When blanks are made, you can assemble the structure. For a start we fasten the flanges with the help of nails and a hammer. The sides should protrude slightly above the surface of the table. Nails embed the punch.
We nail a side.
To do this, you can use the usual glue PVA. We connect four blanks, we coat the joints and fix the box with the help of available tools. The glue joint should harden well.
We glue, with the help of clamps we connect the parts to be glued.
To do this, you need to symmetrically put on the back of the table.
Box sticking with the same glue and give freeze.
When the box is glued to the table, you can proceed to fixing the legs. To do this, in the four blanks, we first make holes for fasteners.
The legs are almost ready.
We attach the legs to the box with screws. Their length should not exceed 35 millimeters, because otherwise the screws will come out on the other side.
Fastening the legs to the box.
When the design of the breakfast table top is fully assembled, it should be carefully treated with sandpaper. And then you can varnish.
Getting down to applying the paintwork.
We reviewed the step by step instructions for making the most simple option for a bed table.
Comfortable breakfast table with sturdy legs.
It can be slightly modified and supplemented with various details. And if you still decided to make just such an option, then in the end it can be originally decorated.
And then it will be a very beautiful addition to the interior of the house.
How can you decorate a wooden table for a bed? The easiest option - painting. To do this, choose any quality paint for wood.
The table can be painted in one color, or make an original drawing.
If at home there is a small piece of beautiful fabric, then it can also be used to decorate the product. For example, you can cut a strip of fabric and stick it on the side surface. It is also possible to make flowers from fabric and attach it to the side surface with the help of PVA.
The table top of such a table is a field of activity for the imagination of designers.
How to make a bedside table with your own hands
We do the restoration of the table with their own hands
How to paint the table yourself?
We make a comfortable party for the child with their own hands
Table for circular saw with their own hands. Drawings, photos, tips.
Joiner's table do it yourself
To collect the dream apartment
