Step by step instructions on how to assemble roller blinds.

For framing the windows are less likely to choose curtains. Recently, blinds were considered fashionable, and in fact roller blinds look much more attractive. With their help, you can adjust the lighting in the room. Windows are not only eyes of apartments, but also communication with the outside world. Stylish curtains are often called light filters.

The roller blind protects the room from the sun, gives an original and attractive look to any room.

For the kitchen, housewives usually purchase items that are easy to clean. The bedrooms are more dense, for the nursery - colorful and bright, and for the dressing room - transparent. So, in the bedroom pick up the product from non-toxic, natural material. This should be noted. Today there are products with the following systems:

• Open pattern when the curtain is wound directly on the open roller.
  

  Open type roller blinds are the cheapest

• Closed sample when the web is wound on a roller. Directional fishing line is located on two sides. The weighting agent causes the fabric to fit very tightly.
  

  In the closed curtains, the shaft with the cloth is hidden inside the case

Component blinds

To prepare a box, apply light breeds of a tree. Fabric must be environmentally friendly, non-toxic. The components of the eaves include:

• canvas;
• stubs on the sides;
• inside - control mechanism;
• side - control chain.

The main parts of the roller blinds

An example of a complete roll blinds open type

So, the package includes the required components, fasteners and instructions with pictures. We add that the installation is in the window opening, on the frame and just on the sash. Most often choose the latter method. They can even be installed on a glass door. It's comfortable!

Original blinds

Products made from a special fabric that does not fade and does not fade. The functional part of this product includes a smooth canvas, which is easy to roll. The following types are on sale:

• Transparent, which can be seen in offices (combined with tulle).
  

  Transparent roller blind as usual for tulle

• Products that do not let sunlight through completely, retaining heat (suitable for a winter garden).
  

  Burn-out - translucent roller blinds, retaining approximately half of the sun's rays

• Curtains “day and night” - a combination of transparent and bright strips of fabric (regulate the degree of darkening).
  

  The light transmission of day-night curtains depends on the density of fabrics used in the manufacture of linen

• Samples that do not transmit light at all (suitable for a bedroom).
  

  Black-Out blackout curtains completely block sunlight, keep you warm and reduce street noise.

Multifunctional

At assembly the cloth twists in a roll. The material is used from completely transparent to dense. The base has anti-dust and anti-static qualities.

In the open position, the curtain fabric is wound onto the shaft; when the curtain is closed, it is lowered down due to the weighting plank

Important! Stain remover for cleaning housewives purchase, based on the type of fabric.

The advantage of the mini-roll is that the frame remains free. If you want the curtain to have a long life, it must be dense and moisture-resistant. When choosing, it is advised not to stop at the cheapest options. There are currently types of rollers such as:

• cassette;
• open;
• large roll;
• mini.

Note that when assembling some skill and manual dexterity. Each of the methods has its advantages. Depending on the model, the installation process may differ. Specialists call fixing with glue the fastest mounting method. But this method is quite controversial.

Lightweight attachments can be attached with Velcro. The cheapest method of installation include installation by means of liquid nails. So, heavy construction will perfectly hold the screws. It's comfortable! Many models are designed so that installation is not too complicated.

Widespread fixation directly on the window. Experts advise the use of removable latches. Devices that install without a drill, look very neat. And how to assemble a roller blind on the plastic profile, you can find here.

Mini-curtains are usually installed directly on the sash window with double-sided tape

Important! The surface before starting work must be degreased with alcohol. Also before installation you need to measure the width and height of the roller shutter.

If necessary, the curtain can be cut to the desired width.

Detailed assembly sequence

1. First, assemble the bracket and fix the details until it clicks.
2. Then double-sided tape is glued to the pad (if installed on it).
3. The brackets with the pad connect to the characteristic click.
4. The design is collected on the windowsill first.
5. Put it to the window sash and mark with a pencil the placement of the left, right site. Then glue the pad into place under the markup.
6. Install the right bracket, put on a shaft with a cloth. Next, add the left, make a mark regarding the location of the left area. Then disconnect the left from the site. The empty part must be glued to the marked place on the profile.
7. It is necessary to place the shaft on the right, and left to fix.
8. Then release the shutter and mark the position of the lock.

The process of assembling and installing the curtains is quite simple, but requires accuracy and accuracy.

Note! It is recommended to fasten the shutter to the sash, based on the width of the material. A double-sided tape can be glued only 1 time. Although set in this way quickly - in 10 minutes.

If you are not confident in your own abilities, advise you to contact specialists. It is recommended to call the measurer, leaving a request on the appropriate site.

One more assembly of the roller blinds is proposed, step-by-step instruction below. There are such stages of installation on the “blank door” with the help of adhesive tape:

1. Use mount without screws. Beforehand, the window profile must be degreased, make markup and mark the installation location with a pencil.
2. Then they remove the protective layer of double-sided tape and fix the brackets. First mounted where the element of manual or automatic control will be placed.
   

   Installation on hanging brackets is possible only on movable casement windows

3. Next, the shaft with the canvas is placed in the cavity of the bracket. When clicked, attach the other side of the shaft. The free running of the part that rotates will help to do this without problems.
4. It is believed that for fastening curtains with a width of approximately 75 cm there will be enough fasteners on adhesive tape.But it is recommended to drill holes in the profile and wrap the screws.
   

   When installing curtains on beadings, the screw length should not exceed the bead depth, otherwise the glass unit may be damaged

5. The final stage is the installation of device covers.

Aesthetic and practical

The use of plastic profiles has led to a change in the design of houses. Replaced heavy curtains came functional devices. They are easy to maintain. This should be noted.

Roller blinds, often used in the design of modern interiors, are easy to maintain and use.

The only disadvantage is that they can not adjust the direction of the light and look a bit laconic. Although the entire space of the room is used as efficiently as possible.

We add that plastic windows differ from wooden analogues. Ordinary portieres do not look very aesthetically pleasing with such glazing.

How to disassemble the curtains

Disassemble the curtain will be easier if you understand its device. The diagram shows a typical open curtain design.

• If the material is attached to adhesive tape, it is necessary to unstick it.
• If the product is fixed on the screws, they should be unscrewed, then remove the base.
• If the fastening of the curtains on the spring bracket, it is necessary to pry one of the fasteners and get the roll.

Additional Information

Keep these devices need to clean. The dust of the hostess is cleaned with a vacuum cleaner at low power or with a steam generator. For washing, it is recommended to rinse under the shower, turn the fabric in a horizontal position or clean with a stain remover on a natural basis. In a pinch, there is also a dry-cleaner.

When cleaning the fabric, try not to rub hard or press on the canvas.

Application tips

If they need to be washed, you should:

• roll them into a roll;
• detach the line;
• unhook the weighting plug;
• remove the protective capsule;
• Remove the tube with a cloth with a screwdriver.

To pull out a roll with a cloth, you need to press the tabs located in the side brackets

Important! This item can not be pressed. Allowed to iron the curtain with a slightly hot iron.

The advantages of such curtains include:

• variety of control systems;
• the possibility of fixing the material at almost any height;
• cleaning with a damp cloth;
• technology impregnation products with a special composition;
• combination with traditional curtains;
• possibility of placement in doorways;
• large selection of textures and shades.

The disadvantages include the fact that the working mechanism sometimes fails quickly.

Lubrication of rubbing knots curtains increases the life of plastic parts

User Guide

1. Movements are made without jerks, smoothly.
2. Do not touch the cloth with wet hands.
3. Do not hang products near batteries and stoves.
4. If the mechanism is sticking, experts advise to carefully lubricate it.

Roller blinds should be used carefully, as their fasteners are plastic.

A variety of colors will help you choose the product to almost any room. The window will look unusual. It is economical and practical! With their help, it is quite possible to create a unique apartment design.

Video on how to assemble and install a roller blind with fishing line

Photo ideas for window blinds