How to sew tape to the curtains: step by step instructions, photos
Decorations using textiles help to quickly update the interior of the room and add fresh notes to it. The curtain tape was widely adopted for a decor of windows among designers, masters of sewing and housewives. Read further in the article on how to sew curtain tape to the curtains.
Content
- 1 Curtain tape for curtains and tulle
- 2 How to sew a curtain tape to the curtain: step by step instructions
- 3 How to hem a curtain and sew a curtain tape to it
- 4 How to sew tape for hanging curtains on the ceiling eaves
- 5 How to sew a curtain tape on the curtains
- 6 How to sew braid to tulle
- 7 How to sew tape to curtains to close the eaves
- 8 VIDEO: How to sew a curtain tape.
- 9 50 beautiful examples of curtains in the interior:
Curtain tape for curtains and tulle
Curtain tape resembles a ribbon and is white or colorless. Throughout its length, parallel ropes are drawn, and in the middle there is a dense layer with eyelets for hanging the curtains to the fixing device.
Curtain tape - a special type of soft decorative accessories used to form a fold of various sizes and shapes. This is a kind of framework for all variations of assemblies. With the advent of the tape to fasten the curtains has become much easier and more convenient. It is no longer necessary to attach metal clips that damage the base or sew the loops by hand. In total there are approximately 70 varieties of braid.
They differ in the following characteristics.
- Fixation methods. These can be eyelets, eyelets for hooks, strings, pipes, and sticky stickers.
- Fold configuration. There may be many options that depend on the wishes of the customer or the author's imagination.
- Dimensions. A tape from 1.5 to 10 cm is considered standardized. 2.5 and 6 cm are more in demand.
- Material. For the upholstery of air organza and veils use fishing line, and for thicker weighty textures - polyester, cotton and paper.
IMPORTANT! Curtain tape sew from both natural and artificial materials of different density. Braid, made of rigid materials, perfectly keeps its shape.
How to sew a curtain tape to the curtain: step by step instructions
In order to correctly attach the braid and hang the curtains, you need to know how to attach them to the eaves. Incorrect selection of a canopy method can harm the author’s idea and spoil the design concept. In addition, this is often the cause of the collapse of the whole mechanism.In construction hypermarkets, you can see a variety of samples of cornices. However, the most popular products made of metal, wood, as well as ceiling and string models.
The ways of fastening the curtains to them are as follows:
- Rings. The most budget and common method of fasteners. In addition, they are often included in the main set.
- Kuliski or pockets, located on the top line of the curtain. Designed for mounts with a slit in the shape of a circle.
- Clothespins. Suitable only for weightless materials.
- Clips. They are similar to clothespins, but devoid of teeth. Designed for weightless textiles. Some subspecies are equipped with locks and may have design processing.
- Textile loops are made from the same material as the main product or similar to it.
Next, using the photo and step by step instructions consider how to sew a tape to the curtains. This master class will be useful for both beginners and more experienced craftsmen.
How to hem a curtain and sew a curtain tape to it
Initially, investigate whether the cloth is clearly cut off by the seller of the goods. If there is an image on the surface, then there will be no difficulties. In order for the curtain to hang evenly, the edge must be aligned in such a way that it runs perpendicular to the share thread. You can spend a little experiment. Secure the entire cut to a large wall and evaluate whether there is a tension of one side up. Next, by sampling, determine the position in which the fabric hangs evenly.
Follow the following instructions, which tell you how to properly sew curtains and sew curtain tape:
- Iron the fabric and process all edges of the cut. Usually do a double hem. This method of filing is easy to shorten the product without trimming, as a double filing will remove up to 30 cm of material.
- Before you attach the ribbon handle the upper cut. It is folded to a certain size and ironed. At the same time, in order to prevent unpleasant surprises, the degree of fineness and texture of textiles are taken into account.
- Then we do the outline with our hands, pre-folding the tape a couple of centimeters and fixing it with tailor's clips.
- Stitch on the machine. The exact number of stitches depends on the parameters of the tape: for narrow ones - 2 lines on both sides, for width up to 12 cm - 3 lines with auxiliary average, and for wide ones - 4 lines.
- After the tape is stitched, we pull the ropes and begin to create the intended pattern. It is not recommended to cut off the elongated cords: knots are made of them, and then they are hidden.
IMPORTANT! Most seamstresses make a tiny pocket, which performs its own special task - hiding from the visibility zone an excess of ropes and their knots.
How to sew tape for hanging curtains on the ceiling eaves
Hang curtains on the super fashionable ceiling moldings is difficult and time consuming. They are equipped with special hooks for suspension. For curtains, the use of mounting tape is necessary.
To ensure that the work was carried out perfectly, follow the proposed algorithm:
- Specify the strength of fastening tapes to matter.
- Pull the strings, collect and tie them with one edge. This is done in order to reduce the width of the curtains and the formation of a clear tail.
- Attach the hooks to the curtain, connecting the loops of a specific shape, sewn into the mounting tape. At the same time, keep a distance of 10 cm between them.
- Then fasten fasteners for the eaves.
- After completion of work, check the strength of fixing the fasteners to the eaves.
- Next, you will need to seal the place of questionable fastening of curtains, or to eliminate defective components.
If an error occurs in the installation, the curtain may break off in an unforeseen situation, for example, in the classroom during a lesson. Therefore, for general security, you need to correctly make calculations.
How to sew a curtain tape on the curtains
The assembly factor in this example is taken as minimal, so the curtain tape must be narrow and dense. From the braids are needed only fixtures for hooks. To sew the curtain tape to the curtain, you should carefully select the thread to match the blackout fabric. This will make future seams as inconspicuous as possible on the front side of the web. Many make the mistake of buying accessories before the canvas is selected. You can go shopping for a tape when the curtain is already in stock. It is important to make sure that the length of the tape will be sufficient, taking into account all the folds and the nuances of the cut. However, it is better to buy a tape with a margin.
The instructions for sewing are as follows:
- To start, hem the sides of the curtains.
- Next, take the curtain face up and put a ribbon on it, too, face down. A folded seam allowance must be sewn inside out.
- Lay the first seam along the edge of the braid.
- At the end of the seam allowance also tuck inward.
- Turn the porter upside down and fold the ribbon over the curtain so that it is 0.5 cm from the border of the braid to the bend. It is necessary to hide the hooks behind the curtain.
- Lay the second line also at the edge of the tape. The front side should look smooth and neat.
Additional Information! It is important to know that small harnesses are embedded in the tape, with which the structure is tightened to the desired shape. Sewing on the harness can not be, if you plan to use them in the future.
How to sew braid to tulle
In this embodiment, suitable thin ribbon. The first step is to calculate the parameters of tulle and braid. This is easy to do by multiplying the length of the eaves by the coefficient of the assembly of matter with the addition of 25 cm for deformation and processing.
When choosing a wide band, observe the following sequence of actions:
- Carefully handle the tulle from all sides except the top. If the material is free-flowing, then additionally brush it on the overlock. You can retreat three threads and cut in a straight line.
- Fold the tulle on top of the wrong side to the width of the curtain ribbon and iron.
- Apply a braid for tulle to the ready turn, retreating from the bend up to 1.5 cm. The harder the tails are, the more distance will be required. Make sure that the tape does not protrude beyond the border of the canvas.
- Pin the ribbon and tie it to the tulle.
- Sew through the tape. The number of stitches must match or be greater than the number of rows on the tape. To avoid wrinkles, the material should be slightly tensioned and always scribbled in one direction.
- Process the side edges and remove the basting.
In case the band is narrow, the upper cut is bent inside out by 2 cm, and then overcast by hand.The curtain tape is fixed with pins of 5 mm. from the top face. Then sew in any convenient way. It is important to remember that the loops must be on the outer part of the ribbon in order to fasten hooks or rings.
Note! When working with tulle, it is necessary to avoid unnecessary holes from needles and pins, as the matter can be deformed. Tulle is an obedient material, and many beginning seamstresses begin to “fill the hand” on her.
How to sew tape to curtains to close the eaves
There are situations when the tape must be positioned so as to close the eaves. This is done in order to mask the flaws of the product or decoration, for decorative purposes. After all, alteration is sometimes not feasible or difficult. To do this, put a ribbon on the prepared cut from the inside out so that it is not visible from the face. Usually it is sewn 0.3-0.5 cm below the end of the fabric.
Also consider the following guidelines:
- Along the edges leave a reserve tape, and fasten the cords bundle.
- Lay an additional line in two or three places, which will create rigidity and the top will exquisitely stand flounced.
- Glue sealant (dublerin), if the material allows it. When sizing with iron, lightweight fabrics easily ignite and there are ugly traces on them.
- Do not forget to put the curtain on the bottom hook row, then it will rise and block the mount. If there is a single row of loops, then the tape must be looped down.
- Check the ratio of the width of the product to the length of the eaves. The more the cloth is pulled down, the tighter the comb will be.
With it, you can create a variety of patterns and spectacular draperies on the curtains. Properly sew the tape at home on the curtain easily enough with his own hand, if you have all the materials and sewing equipment.
VIDEO: How to sew a curtain tape.