How to stroke the curtains without removing, without iron

Not everyone knows how to iron curtains, but how to do it correctly with different fabrics. How to smooth curtains on weight with a steamer or with an iron? Proper, competent application of useful knowledge will help not to spoil the curtain after the burn from the iron, which is then very difficult to remove from the surface of any fabric.

Briefly about ironing curtains

When ironing enough to perform a few simple conditions for the procedure to end successfully.

First of all, it is worth noting that only clean curtains are ironed. Otherwise, there may be undisturbed places, and spots (if there are such on the curtain fabric) will become difficult to wash. This rule applies not only to the classic version of smoothing curtains, curtains. Owners of special vertical steamers should also take care of prewashing textiles.

The second rule, which is worth adhering to (if other recommendations are not provided for) is a quick ironing of a damp cloth. This is especially true of natural thick fabrics such as flax or solid cotton. Curtains with folds, wrinkles, which may remain after washing, you need to moisten a little. To not do this, you need to remove them from the rope on which they are dried, shortly before complete drying. As for the process of ironing itself, it is required to find the wrong side of the curtain, put the fabric on the ironing board with this side up.

Important! Be sure to appreciate the weight, the size of your curtain, since with too many bends the curtain will not be able to straighten, it can be crumpled again before the end of the ironing process.

Some fabrics (especially thin, transparent tulle) require a special, delicate mode for ironing. At the same time, you should make sure that the iron selected is the type of fabric from which the product is sewn. Delicate modes should definitely be followed if you need to stroke velvet, viscose curtains or polyester drapes. The last two of the listed types of curtains cannot be smoothed with the steam function turned on.

As for the horizontal ironing of long curtains, the process will have to be divided into several stages. First of all it is necessary to pay attention to the upper part of the fabric. Having ironed it, it is necessary to move the curtain on the ironing board forward, to level the resulting folds manually.Another way to iron a large curtain is to wind its already ironed part onto a stick, the size of which corresponds to the width of the curtain.

How to stroke curtains on weight without iron: description of methods, equipment

How to smooth curtains on weight without iron? In the absence of special equipment for vertical ironing, you need to arm yourself with a regular iron, an added part for an ironing board, which is intended for ironing hoses and other small parts. Attach it to one side of a vertically positioned curtain, and on the other, gently hold the iron. Moving in this way, smooth the entire surface.

If you do not have the opportunity to use the steamer, there is a method that allows you to iron the curtains vertically, without using special equipment. The essence of the budget method is that after washing the curtains must be straightened immediately, neatly hung on a clothesline in the bathroom, on the balcony or in the kitchen. Best of all, a special system is suitable for this purpose, including round metal-plastic rods, which will not allow a dried-up curtain to receive a hall that can be formed from a thin clothesline.

This method is suitable for thin, easily smoothed fabrics. If your curtain to eliminate folds, wrinkles after washing is not enough, you need to hang it in the bathroom. After that, quickly fill the bathroom container with hot water, tightly close the door to the room.

Thanks to the water vapor rising from the surface of the water, the curtain material will smoothly smooth out until the water in the font cools. In principle, twenty minutes of such “steam exposure” is enough. The main thing - to make sure that all the folds when hanging curtains were straightened. After the procedure, the curtain must be removed, hang in its place.

How to pat a steamer: ironing at home

How to stroke the curtains without removing? In order not to lower part of the large curtain on the floor when ironing on a classic ironing board, not to remove the curtains already hung, you can refuse this method in favor of vertical ironing. This method has a lot of advantages, the most obvious of which is high-quality ironing of curtains, which allows not to miss a single section, not to crush the curtains again.

How to iron the curtains with a steamer? For vertical alignment of curtain fabric, you need special equipment: floor or manual steamer (steam generator). With this type of ironing, it is necessary to carry out the device from top to bottom, gradually processing the surface of the hanging curtain.

How to iron polyester curtains: briefly about the qualities of the fabric, whether to iron

The smoothing of polyester curtains, which perfectly complements the interior of the material, should follow a specific algorithm. If you do not adhere to the described action plan, you can spoil the fabric curtains.

To steam polyester curtains at home, follow these steps:

• prepare an ironing board;
• turn on the iron in the socket;
• choose the most delicate ironing mode (for a fabric such as polyester, you need to set a 140-degree temperature, not more), wait for it to warm up sufficiently;

  Expose the iron to the “Silk” or silk mode

• Place the fabric on the board so that you have the upper left corner of the material in front of you;
• Carefully, without pressure, iron the fabric;
• move the shutter away from you;
• continue with the previous two steps from this algorithm until you reach the bottom edge of the curtain;
• if the curtain is wide, iron it in the same way by moving the fabric to the left.

Additional Information! Polyester curtains after washing should be immediately hung on the eaves, if there are no folds on their surface: this material can dry quickly, without ironing.

How to steam curtains at home: tips, advice to housewives

How to stroke the curtains at home, do not spoil them? If you have not encountered ironing of any particular type of curtain, just look at the label: there will be minimal instructions for washing, ironing these curtains. In the case of an individual order of blinds in a special studio, check with the seller in advance what kind of fabric the blinds are made of. Based on the information received, you should choose the desired mode of ironing / steaming on your iron.

If you doubt the composition of the fabric from which the curtains are made, but there is nowhere to find out, check what temperature is needed experimentally. To do this, find an inconspicuous piece of the curtain (for example, at the bottom of the gate) and, putting the iron on the minimum temperature, try to iron it carefully. The folds have smoothed out - it means that the chosen mode is suitable, it has not smoothed out - continue the experiment with the next temperature mode.

The technology of ironing curtains is unique for each individual type of fabric. The process can be complicated not only by the complexity of smoothing the folds, the need to accurately select the desired temperature mode: it is also not easy to manage curtains of large sizes. In this case, it is recommended to use the technology of vertical stripping.

In the absence of a special steam technology, it is worth using the simple “ironing” method using steam in the bathroom. The last way, which can be used without any special tools at all, is to hang a well-straightened, washed curtain on the eaves immediately after washing, delicate spin.

Video on how to quickly iron a thin curtain