Standard depth wardrobe

Built-in wardrobe is a functional item of any interior. Fill an apartment of a small size, decorate an elite room. Appearance is made in any style. A large selection of standard models offer furniture stores. Individual models are made by manufacturers according to the order of the consumer.

The wardrobe is in great demand due to its practicality, functionality and attractive appearance.

The device is mounted on a flat surface.

It is necessary to measure the dimensions of the room using a tape measure

1. Before calling the measurer, determine the principle of placing clothes in the closet.
   

   Keep each type of clothing separate so that the entire range is visible.

2. Sort things into groups, defining each group, shelves of appropriate dimensions. Determine which things are more convenient to put on the shelves, what needs to be arranged in the drawers. Label each place.
   

   The correct size of the internal filling closet

3. Place outerwear in the corner of the closet near the door, close to the shelf filled with hats, gloves and scarves. Fill the bottom of the cabinet with shoes.
4. Calculate the dimensions of the wardrobe compartments.
   

   In order to competently organize the internal filling of the wardrobe, you should decide what things and objects will be stored there.

5. Having decided on the layout, make a rough draft of the drawing. After completing the design, call the measurer.

Calculation of the dimensions of the wardrobe

What depth should a cabinet be?

Standard wardrobes for 60 and 45 cm

When modeling a product, do not forget about compliance with the standard parameters.

Depth cannot be less than sixty five centimeters. With less depth it is difficult to place things. The volume of hangers without clothes is fifty two centimeters. Clothes hangers occupy sixty-five centimeters. Closing doors should be free without effort. When calculating the dimensions, consider the thickness of the material used to make furniture. Thick walls reduce the volume of the device.

Drawing of a large wardrobe with a depth of 60 cm

What size can a wardrobe be made of?

Approximate standard dimensions for the manufacture of wardrobes

Built-in cabinets produce different dimensions. The length of the device varies from 1.2 m. With a smaller length, the installation of sliding doors is not recommended. Creating a cabinet with a length of less than 1.2 m, is accompanied by the arrangement of hinged doors.

Compact wardrobe can be placed in a small hallway or on the balcony

The boundaries of hull systems created from particleboard are limited by the size of the sheets themselves. Standard chipboard sheet has dimensions of 2.8 m by 2.7 m. Some manufacturers offer chipboard sheets having a height of more than 3.0 m.

Standard height is directly related to the height of the apartment ceilings.

Depth of wardrobes in a narrow hallway

The small cabinet fits perfectly into the interior of a small hallway.

Most apartments have small hallways.A small area can not be filled with non-dimensional furniture. A small area is filled with devices of minimum depth. The depth of the device for a small hall is at least 0.35 m. Space is saved due to a different arrangement of hangers. Hangers are located along the length of the filled area. Such cabinets have a smaller capacity, have several sliding doors. Swing systems in a narrow area are inappropriate. The furniture of small hallways is equipped with a mirror surface. Mirrors allow you to visually increase the volume of the filled area.

Sliding wardrobes with variable depth: corner and radial

The cabinet with variable depth is divided into zones

Among the huge choice of systems, corner and radial cabinets deserve special attention. Models significantly save the area of ​​apartments. Angular, radial devices are perfect in the hallway, decorate the bedroom, living room. Thanks to the wave-like shape, ideal for children's rooms.

Straight and undulating wardrobes for different interiors and rooms

There are the following types of corner cabinets:

• Rectangular - have the shape of a rectangle, a square. Refers to standard classic furniture. The universal device, not differing special originality.
  

  Large rectangular wardrobe with an example of internal filling

• Corner - systems are designed exclusively for filling the corner of the apartment. Fill in every corner of the room. The rear walls completely copy the shape of the corner. Products can be equipped with hinged and sliding doors. There are options that combine sliding systems and sliding mechanisms.
  

  Corner wardrobe with dimensions and internal filling

• Concave - samples, significantly saving the volume of rooms, halls, corridors. The concave facade allows you to visually model the filling area. Options are well suited for filling niche areas.
  

  Radial concave wardrobe corner-coupe

• Convex - a model having a radius of a circle. Convex cabinets are placed in the corridors, hallways, halls. The device does not require a niche, it is installed on any part of the wall. All branches of the model are well accessible, easy to use.
  

  Radial sliding wardrobe on three doors

• Wave-like - a combination of concave and convex facades. The first copies appeared relatively recently. Differ intricate form. Introduce a novelty in an interior, combining opposite lines. Suitable for bedrooms, living rooms, children's rooms.
• With its many advantages, radius systems have several disadvantages. Characterized by small capacity. Manufacturing requires additional labor, material consumption, are much more expensive than their rectangular counterparts. Require special care for the recoiling system. The basis of the roller mechanism must be of high quality. Not fit into every interior.

Sizes of a small radius cabinet

Wardrobe closet width

When modeling the built-in cabinet, the correct calculation of the dimensions of the door front is of great importance.

Door wardrobe layout

The width of the sliding door design from two meters should be at least sixty-five centimeters. Violation of this ratio will lead to a malfunction of the roller mechanism.

Arrangement of two-, three-, four- and five-door wardrobes

It is difficult to design the width of the doors of narrow devices. It is necessary to remember the main rule, the ratio of the height and width of the sliding mechanism should be 1⁄4.

If the ratio is incorrect, the mechanism will be inconvenient to operate, function poorly, and often break.

Maximum height of wardrobes

Tall wardrobe with a depth of 68 cm in a spacious hallway

The maximum system height is limited by the height of the room to be furnished. It is undesirable to design a cabinet with a height exceeding the size of chipboard panels. The standard chipboard size is 2.78 m.There are slabs with a height of up to 3.2 m. An inseparable facade of doors that exceeds three meters is not advisable to install. The higher the door leaf, the greater the load on the sliding door mechanism. The device will be hard to open, the roller mechanism will quickly fail.

Sliding-door wardrobe from wall to wall 70 cm deep

The height of the main section of the cabinet cannot exceed 2.2 m. If necessary, the model can be equipped with an additional section with separate sliding doors. In the remote upper part you can arrange shelves with things of seasonal use.

Modeling height, consider free space of the furnished area. Furniture, towering up to the ceiling, looks good in small rooms, with a ceiling height of not more than 2.8 m. In an apartment with ceilings over 3.0 m., The wardrobe of the ultimate level looks unnecessarily cumbersome, visually reduces the area to be filled.

The furniture system, built from different materials, looks less cumbersome, has a more stylish look. For decoration, you can combine glass, mirrors, wood, satin glass, bamboo, use photo molecular printing. Glass satin, photo molecular printing is combined with any material.

When modeling the model components, one should remember whether the house is equipped with a freight elevator, take into account the overall dimensions of the freight elevator and the size of the openings of the entrance doors. Consider the possibility of supplying the component parts of the product.

Minimum size corner cabinet

Corner built-in wardrobe, the best solution for filling the space of small areas. The product will fit well in the narrowed area of ​​the apartment and correct the irregular shape of the room.

Non-standard furniture is difficult to purchase in the trade network in the form of a finished product. Non-standard wardrobe made to order from furniture manufacturers or make their own hands.

When modeling, we draw attention to compliance with the standards of depth and width. The desire to save square meters sometimes leads to the presence in the room of a cabinet with limited functionality.

Diagram of a properly equipped storage system in the closet

The depth of the shelf can not be less than twenty-five centimeters. These shelves are not very convenient, but quite functional. Smaller shelves are not practical for accommodating standard items.

Shelf depth should not exceed one meter, shelves longer than one meter are not always convenient to use. It is difficult to reach the necessary things. Far compartments can be filled with things not daily use.

Internal dimensions of the 2-door wardrobe

The width of the product should not be less than one meter. Retractable facade with such a width should be within forty-five centimeters. Doors of smaller size will make the design is not easy to use.

The height of the corner model is not strictly limited. It should be noted that the model to the ceiling, with a height of more than three meters, looks too massive. Moving the high cabinet door is hard, difficult, inconvenient. The bulky look of the design can spoil the interior of the room as a whole.

Video: How to calculate the cabinet. QUICKLY and SIMPLE