How to make a cabinet above the washing machine in the bathroom?
Nowadays, small studio apartments, or apartments in the so-called “Khrushchev”, where every centimeter must be properly used to take maximum advantage of the space, are very popular. For a modern interior, beautiful, high-quality and functional furniture is the main rule.
One of the highlights is the equipment of the place for the washing machine. No matter where it is located - in the bathroom, hallway or kitchen. Installation in the bathroom is certainly much easier than, for example, in the kitchen. Installation does not require additional supply of hoses.
To save space in the room or masking household appliances it has become popular to make the cupboard above the washing machine.
Content
The advantages and disadvantages of this interior solution
Let's start with the pros.
- First, the cabinet covers household appliances from moisture (if the washing machine is in the bathroom, water naturally falls on it), protecting it, thereby its body from corrosion.
- Secondly, the cabinet can be made vertical, and the upper compartment above the machine can be filled, for example, with household chemicals. Everything is convenient and “at hand”, and significantly saves space. A large number of additional shelves creates order and simplifies cleaning the bathroom.
The built-in cabinet can be installed only in large rooms. It requires a lot of space, so for small apartments, this option, unfortunately, will not work.
The only negative is that you can not notice the leak in time, if the washing machine is installed inside. Also, the cabinet may be short-lived, but it will depend on the material that you select for its manufacture.
The choice of building materials
Before choosing building materials, careful and accurate measurement of the bathroom and washing machine is necessary. Different models have different dimensions. Then you need to make a drawing, considering the size of the cabinet. It should be 3-4 cm wider than a washing machine.
For height, choose the most suitable option for you, can vary from 2 to 2.5 meters. The higher the design, the greater the number of functional shelves. Note: high construction is unstable. The size of the cabinet should correspond to the size of the bathroom, large furniture in small rooms looks ridiculous and takes a lot of space.
After the measurement, we go to the store and select the moisture-resistant MDF, which is the most suitable and budget option for the manufacture of furniture. This is a relatively new material, which is obtained by pressing the fine dry sawdust. But at the same time, it is very resistant to aggressive environmental influences. When choosing MDF you should pay attention to the thickness, choose the desired color and texture. It must be PVC coated for extra protection from moisture. The thickness of MDF requires at least 19-20 mm, with such parameters the cabinet will come out very reliable and will withstand a washing machine weighing about 80 kg.
Carefully examine the surface of the product for the presence of chips and scratches. Proceed to making.
From the tools you need a fairly standard set:
- drill;
- screwdriver;
- jigsaw;
- metal corners;
- screws;
- tape measure, pencil.
Before making the locker, we calculate the dimensions of all the parts. Intermediate shelves will be 10-15 mm shorter than the lower and upper walls. Make the markup and cut out the parts to individual size. You can order ready-made material that will be cut on a special machine.
Step-by-step instruction:
- First of all, fasten to the base of the legs.
- Mark up the holes for the shelf holders on the side walls.
- Drill a hole with a drill and insert shelf supports.
- Take the base (bottom) and connect it with the help of angles and screws with side walls.
- We fix the top of the cabinet and the back wall with the help of corners.
- Next, install the internal shelves.
- In conclusion, we install the door with the door closer. If desired, you can make the door with a mirror. Mirrors visually increase the space in the room, so many designers enjoy this advantage.
In some cases, the washing machine does not close the door, and it harmoniously "fits" with the new interior. A white washing machine can be put in a classic snow-white bathroom, and metallic gray will fit in a bathroom with gray ceramic tiles.
If there is no time and opportunity to place the cabinet, a simpler and more affordable option is possible - placing shelves above the washing machine. On them it is also possible to store various accessories that are necessary in daily care.
You can make them from an improvised material, for example, pieces of MDF, which could remain after the repair of an apartment, or from glass covered with film (for easier maintenance).
Buy ready-made furniture, or create a budget and the most suitable in size universal shelving or cabinet? In any case, the choice is yours.
Video: Swing cabinet with washing machine inside
Good afternoon, there is a question on the range
Hello, please tell me the catalog