Spring block

Good sleep is the key to health and good mood. To do this, it is important to correctly organize the bed. From the selected mattress directly depends on the health of the spine and the convenience of body position. Therefore, it is necessary to understand the nuances of product selection and understand what a spring block is.

The basis of most modern mattresses is a spring block

Mattress with independent spring block

Mattresses with independent spring block differ depending on the number of springs per square meter

The mattress, equipped with independent spring blocks, is a structure with no interaction of springs with each other. Each of them is in a special case. This allows you to create an orthopedic effect that implies each part of the body to the extent necessary.

Levels of anatomical effect on the example of spring blocks

Independent spring unit - what is it and how to choose?

Independent spring block - the springs in the mattress are placed in separate covers and work autonomously

For a suitable choice it is necessary to figure out what the structure consists of. An independent spring block is a base with many springs acting autonomously. The surface of the product becomes elastic and elastic, so that the body position will be correct during sleep. With an independent spring block, the mattress completely repeats the curves of a person lying down. It should be noted the main advantages of this design.

1. Anatomical. The mattress fully adjusts to the contours of the body. The comfort of the product increases with the use of more springs.
   

   Spring mattresses better adapt to the sleep position, if the spring unit contains at least 500 springs per square meter

2. Safety and long service life. There is no formation of dents. The strength of the surface is high, thus avoiding the puncture of the fabric with a broken spring. This prevents injuries.
   

   To increase the lifetime, it is important to turn the mattress once a quarter.

   

   Since each spring is placed in a separate cover, in the event of a breakdown it will not be able to penetrate the mattress and injure the sleeping

3. Exposure to high loads. Independent spring block is not deformed with a lot of weight.
   

   Independent spring blocks easily cope with a person's weight more than 100 kg and at the same time do not sag and are not deformed

4. Minimal transfer of motion. If one turns over in a dream, the second one does not feel it. The effect is obtained through the work of springs independently, separately.
   

   Such mattresses have a minimal or no wobble effect.

5. Does not creak. Each spring is located in its own cocoon of fabric. Therefore, there is no unpleasant noise when using the product.
   

   The springs are isolated from each other, so there is no friction and creaking.

To design was of high quality, you need to know what to consider when choosing an independent spring unit.

With different differences in the weight of the spouses, you can choose a variant with two zones of rigidity

The main criteria are shown in the table.

Spring block bonnel - what is it?

In dependent spring blocks, all springs are biconic in shape and are connected by continuous weaving.

Reinforced version of the classic spring block bonnel, in which over the whole area the mattress is reinforced with blocks of high-density polyurethane foam

This spring block is in demand. He is a "dependent" species. Because the internal structural elements are interconnected. As a result, each spring depends on the others. A special method is used to bind them.

Bonnel spring block consists of 5-coil springs made of steel wire

The radius is constantly decreasing and increasing. The center of the product spring block and its parts are narrowed, and at the edges begin to expand. Thanks to this system, the load is distributed evenly and maintains an optimal body position.

The mattresses on the basis of the spring block bonnel are characterized by a long service life, are well ventilated and dry quickly when wet

Springs are made of high quality steel. To connect them using special frames or wire with knots. Unwinding allows you to avoid special locks on the structure. Weaving can be with five or four turns. In the first case, the mattress is higher and more expensive.

All the springs in the mattress at the top and bottom are connected to each other with a steel spiral and are bounded by a metal frame.

Spring mattress blocks: types

Orthopedic spring mattresses of different types

Spring blocks can work in compression or in tension. The first type is often used in the manufacture of standard mattresses. Among the types of blocks stand out the main ones:

1. dependent;
2. acting autonomously or independently.

It has already been noted that in the first case, each internal detail depends on the others and is connected to them. In another form, each element acts independently and does not interact with the others.

The difference in the use of the spring unit with independent and dependent springs

Experts consider this option more suitable for healthy sleep, but it is more expensive. Mattress with dependent spring unit is cheaper. You can choose a quality option for a good holiday.

The difference between independent and dependent spring unit. What are we overpaying for?

The spring unit can be independent system and dependent. It is necessary to understand the main differences between the species. This will make the right choice when buying a mattress. To find out the differences, it is necessary to clarify the main characteristics:

1. Block with dependent springs. They are woven together, forming a single mechanism. The components of the mattress are steel wire parts. Models are divided according to the density of the springs and their diameter. The lower the last indicator and the greater the density, the better the body will be supported in a dream. The advantages of the system are its availability due to its low cost and its ability to withstand heavy loads. Over time, the deformation of the spring unit may occur, the product will begin to sag.Nearby the sleeping person feels all the movements of the second one during sleep.
2. Independent unit. Springs act independently, regardless of each other. The characteristics of the springs directly affect the rigidity of the product and its density. This allows him to become orthopedic. Thanks to independence, each spring is compressed without affecting the others. The load is distributed evenly, the mattress follows the contours of the body. If one of the springs fails, this will not affect the entire product. One of the key drawbacks of the independent type of spring block is the high cost.

"TFK" (TFK) - a classic spring unit with a number of springs of about 250 ave. / sq.m

“Multipocket” - about 500 ave./sq.m with the number of turns usually 8-10 with a height of springs about 13-14 cm, more “anatomical” compared to “TFC”

“Micropackage” (Micropocket) - about 1000 ave./sq.m, with the number of turns usually 12-14 with a height of springs about 13-14 cm, much more expensive than the previous 2

An independent system is not conducive to curing a sore back. But will be an excellent prevention for the preservation of health. If the mattress is purchased for a place of rest, not sleep, then you should not overpay and just choose a dependent system. In other cases, it is better to choose a block with independent springs.

Packaging of independent springs, type of material and method of bonding

The most vulnerable part of the product is the upper shell of the material. It is regularly exposed to springs. Because a weak tissue can easily be damaged. The material should pay special attention. The mattress service life depends on it. The packing of the spring unit with an independent system is also of importance. Use spunbond and firebox. The latter is more durable.

The robust upper shell of the fabric of the independent spring unit significantly increases the service life of the unit.

In the manufacture of the product, the non-woven part is welded using ultrasound. The proximity of the gluing points to the middle of the pocket allows the springs to work more independently, enhancing the orthopedic properties. Also used for the connection of a special glue, which leads to the appearance of a specific smell. Over time, it disappears.

Mattress Tips

The mattress should not be too soft or too hard, namely, such as require weight, size and personal preferences of the client.

For proper choice should be based on the following characteristics.

1. The size. If you already have a bed, you should measure it and choose a suitable mattress. In other cases, you must first find out the size of the bed.
   

   Before you buy a mattress you need to make basic measurements of the bed.

2. Weight. It is necessary to correctly relate the rigidity of the model and the severity of the sleeper. The more the sleeper weighs, the more rigid the mattress should be purchased.
   

   Choosing the rigidity of the mattress you need to take into account the individual characteristics

3. Block type The main characteristics of a dependent and independent system have already been noted.
4. Manufacturer. You should contact only the proven companies that have proven themselves on the positive side.

Sleep comfort depends on the choice of mattress and its components. Therefore, you should take seriously the choice. This will keep your back healthy and provide a good sleep.

Video: Mattress springs: bonnel or independent