Install a built-in dishwasher in the closet is quite possible without outsiders. If the owner does not know how to integrate the dishwasher into an ordinary kitchen cabinet and wants to carry out the installation for the first time, then you should prepare in advance.
Several years ago, the dream of many women to have a dishwasher in the kitchen was unrealizable.
Slide the device into the niche, after pulling out the connecting hoses and power supply wire.
Content
But time has put everything in its place, and today a middle-income family can afford this necessary household appliance.
Slip the last holes in the side walls. Now with the help of adjustable supports it is necessary to set the machine in a horizontal plane.
Embed "dishwasher" can be in a ready-made set. And you can do it yourself.
Preparatory activities should begin with the selection of the cabinet under the dishwasher.
First, you need to find a place where the machine will be installed. This may be one of the floor kitchen cabinets.
Connect the cold water supply hose to the previously prepared connection.
There are interesting solutions to adapt dishwashers in the kitchen:
The last option is the most profitable. Suitable for the size of the furniture element is quite realistic to adapt to the apparatus for washing dishes.
Therefore, the size of the kitchen cabinet must be correlated with the size of the dishwasher, but at the same time take into account one very important nuance.
Connect the discharge hose to the sewer system.
Preparatory activities should begin with the selection of the cabinet under the dishwasher.
The size of the cabinet under the dishwasher must match the parameters of the built-in unit. The mechanism can easily fit into a cupboard under a 45 cm dishwasher or into a 60 cm cupboard under a dishwasher, but it is imperative that there be a certain gap, that is, the diameter of the cabinet should be slightly wider than the unit itself.
Like any technical process, the more associated with the installation of a household appliance, is divided into several basic steps.
Connect the power supply (it may be a regular outlet, but it is better to make the wiring separate directly to the distribution panel).
It is important to get a quality result, then the return from such manipulation will be higher.
It is important that the sequence of compliance is exactly as instructed.
You need to prepare the tools and materials needed for installation only after you have managed to plan where and how you will install the dishwasher, and how you will connect hoses and electrical communications to it.
Ready-made alternatives for installing a dishwasher may not be. Therefore, you should work hard with a hammer, hacksaw or other tools, fitting the already existing cabinet to the parameters of the washing apparatus. And you can make a brand new dishwasher cabinet with your own hands.
The whole process begins with the preparatory work.
In addition to the tools, some materials are also needed, the list of which will also depend on the specific situation.
Be sure to provide the following aspects of the installation;
Manufacturers recommend installing a metallic protective film on the back of the tabletop before installing the device.
If you care about the safety of household appliances that are in your kitchen, you need to add a stabilizer to this list.
Before finally installing the dishwasher, you must:
And one more thing - it is best to twist the adjustable legs of the machine so that the unit goes down to the end, that is, to the floor.
If your kitchen is not organized by a normal outlet for connecting a dishwasher, you have to do it.
Council It is better to pre-calculate the attachment points of the dishwashing machine. It is necessary to drill holes of insignificant diameter, as if charting them. This will help screw the screws into the housing.
In principle, the answer to the question of how to integrate the dishwasher into the finished kitchen with their own hands, is practically given.
We connect the removed wires to the machine, and then to the contacts of the outlet, the wire is enclosed in a plastic cable channel.
Having completed the installation, you should test the operation of the unit at idle. Making sure that the mechanism works normally, you can safely show the work to friends and acquaintances, because installing a dishwasher in the closet on your own is only a real man.
Remained small nuances associated with the connection.
And it is not necessary to wait for repairs to install such a device.
We create projects of kitchen sets. What to consider?
How and why to make a kitchen corner with your own hands?
Standard sizes of kitchen cabinets
Bottle rack in the kitchen or set the pan not only in the nightstand.
Sill-countertop in the kitchen with their own hands.
Benefits of concrete worktops
To collect the dream apartment
