When buying a home for every happy owner, the question arises about the improvement of the apartment. Alas, but not always on the acquired square meters you can place all the desired furniture. The space in the rooms becomes significantly less, while in most cases the goal is to maximize the usable floor space. Today, an impressive number of factories and stores offer furniture for every taste and wealth, but it does not always meet the minimum safety requirements. Yes, and this pleasure is quite expensive.
You can contact the workshop, where not only will they be able to assemble furniture, but also help to make competent sketches and drawings.
It is necessary to apply varnish on the construction, preferably in 2 layers.
Of course, you can contact the workshop, where not only will they be able to assemble furniture, but also help you to make competent sketches and drawings. But then again, it will be expensive. Therefore, more and more people take up the manufacture of cabinets, shelves and other things on their own. Making furniture with one's own hand is an impressive approach to furnishing living rooms, adequate in terms of adequacy and reasonableness, and at the same time a good way to diversify the interior of the apartment. The best option for the manufacture of the cabinet, wall, as well as drawers and shelves would be a furniture board. Especially often this type of material is used to create a kitchen cabinet.. The kitchen is a place where the family gathers every evening at dinner, shares events that happened during the day. Therefore, it is very important in the room to maximize the usable area without overloading it with furniture, leaving more free space.
Aesthetically appealing look.
Next, it makes sense to start installing the doors.
REFERENCE. Furniture shield - material based on natural wood. It is made by gluing bars under a press. There are several varieties of various wood species on the market: spruce, beech, oak, pine. Used for the manufacture of components, boxes, shelves, etc.
The kitchen is a place where the family gathers every evening at dinner, shares events that happened during the day.
As you already understood, making your own home furniture is not only interesting, but also quite simple.
Content
Designs made at home with their own hands from a furniture board have a number of advantages over factory samples. It does not require expensive equipment, it will be enough for the usual tool, which can be found in any owner. You just need to show a little wit, patience and creative approach to the question - and now you are already the happy owner of a modern and spacious wardrobe or a beautiful dining table for the kitchen. So, consider the positive aspects of furniture made from this material.
Furniture shield - material based on natural wood.
You only need to arm yourself with patience, inspiration, the necessary number of necessary tools.
First you need to decide on the design of the cabinet or table. It is necessary to take into account the free space of the apartment, which can be used. The next step is to create sketches and drawings. If it is not possible to develop a project yourself, then on the Internet there are a large number of drawings for various design options. On the basis of the finished plan, the detailing, the counting of the quantity of the necessary material, is made. In addition, the construction plan will help determine what size is best to buy furniture panels, how to cut them, to minimize the amount of waste received.
Used for the manufacture of components, boxes, shelves, etc.
Based on the desired size and design it is possible to make almost any type of construction for the home.
Do not forget about the lacquer, selected individually. Due to the fact that the furniture board is still a tree, and the tree needs special care. In order to prevent deformation, swelling of the surface, disintegration (this is especially true for kitchen furniture), you must purchase a varnish and cover it with a surface at least 2 times. In addition, the lacquer will protect the surface from the negative effects of ultraviolet rays and give a presentable appearance. Today, the construction market offers many varnishes, not only of various colors, but also textures. The same can be said about the stains that are successfully used in the processing of wooden products.
Designs made at home with their own hands from a furniture board have a number of advantages over factory samples.
A wardrobe, desk or kitchen table, which you can easily do with your own hands, will meet all your requirements and harmoniously fit into the overall home environment.
For the manufacture of virtually any design in the home will not require a large number of expensive tools. In the arsenal of each owner with high probability there will be a screwdriver, grinding machine, handsaw and electric drill. With this set of tools you can easily assemble almost any home furniture.
You just need to show a little wit, patience and creative approach to the question - and now you are already the happy owner of a modern and spacious wardrobe or a beautiful dining table for the kitchen.
You can assemble the cabinet yourself using the example of the simplest model. This refers to the classic double-door wardrobe of furniture for the kitchen with a missing vertical partition. Despite the sometimes small size, such furniture can be very roomy and ergonomic.After the preparatory work for the manufacture of the future cabinet will need to cut out all the necessary parts and parts. This procedure is performed using a jigsaw and electric saw. To assemble a double case, you will need:
As mentioned earlier, it is made from a variety of wood species, environmentally friendly material without hazardous impurities and harmful components.
When all the main parts and the frame will be ready, you can proceed to the assembly. First, you need to take into account the drawers and shelves that will fit into the cabinet. For this, it is recommended to leave 775 mm wide when cutting the sheet. Next, you need to fasten with screws 2 side walls and bottom. It is best to fasten the structure at a distance of 50 mm from the floor. After the performed manipulations, it is necessary to proceed to sawing out and installing shelves and drawers. The best option for this would be a narrow furniture shield, the holes in which are best done in 100 mm increments. This is done to avoid material deformation during assembly. When the drawers and shelves are ready, they must be screwed into the cabinet itself with screws. Next you need to install the cover on the frame, fix the back of the wall and fix the base on the corners. As for the doors, for them it is recommended to use a surface with a size of at least 400 mm. Holes for hinges are made in the doors, the doors themselves are fixed with screws to the side walls.
High maintainability.
There is nothing difficult in making a multifunctional, compact and convenient desk from the furniture board with your own hands. As in the case of the cabinet, a sketch and a drawing of the desired type will be required before construction begins. For manufacturing will require:
Furniture shield in all respects is not inferior to furniture made from the cut of a tree.
You can assemble the cabinet yourself using the example of the simplest model.
To build the optimal variant of the table, it is necessary to take into account all the nuances and calculate the required number of niches, shelves and drawers. The size is chosen according to individual preferences and spaciousness of the room. The production of the table is better to start with the manufacture of countertops. This will require the use of a large shield and cut out the workpiece. Pay particular attention to the corners of the table top, which need to be processed and reinforced with bars before assembly. After processing the corners of the tabletop, it will not be superfluous to round out the most prominent parts. This will not only give the table an aesthetically attractive appearance, but also make it less traumatic for all family members. After the table top you need to start making boxes, shelves and doors. Two squares of size 70x70 are cut out of plywood and cut so that 4 triangles are obtained from them. These elements are placed on the back of the frame wall. Proceeding from the finished drawing, shelves and drawers should be placed in specially designated places of the table. The drawers must be screwed almost into the finished part of the construction with screws and then proceeded to install the doors. It is necessary to apply varnish on the construction, preferably in 2 layers. The final step in the assembly will be the installation of pre-purchased hardware, and the writing desk is ready for use.
First you need to decide on the design of the cabinet or table.
When all the main parts and the frame will be ready, you can proceed to the assembly.
In this case, the principle of the table is slightly different from the previous one. It is necessary to use 3 sheets, the size of which will be 2000x200x18 mm. This is the most optimal size due to its strength and, consequently, durability.In the manufacture of the table will need:
On the basis of the finished plan, the detailing, the counting of the quantity of the necessary material, is made.
The best option for this would be a narrow furniture shield, the holes in which are best done in 100 mm increments.
As in the case with a desk, the work before the assembly should begin with the preparation of the table top, which is cut from the shield in accordance with the measurements made earlier and the prepared drawing. On the side surfaces, it is recommended to make two small indentations in order to place the table strictly against the wall, avoiding unnecessary gaps along the edges of the table top. On the vertical wall, the best option would be to install a transverse panel. Installation is carried out by screws on the frame. The transverse panel and the presence of plywood will help give the table rigidity and strength. After that, a framework for shelves and drawers is made, parts of which are attached to the already finished structure. It is preferable to make drawers as much as possible on this type of furniture for greater spaciousness. To build the upper shelves with the required number of boxes, the shield must be sawn, attaching it to the table top with self-tapping screws. For drawers and shelves it is better to use roller mechanisms. As for the part for the keyboard, it is made of a shield that is 40 mm in size. Next, it makes sense to start installing the doors. After preparation of all components should be done processing varnish, after which the final assembly.
Today, the construction market offers many varnishes, not only of various colors, but also textures.
Holes for hinges are made in the doors, the doors themselves are fixed with screws to the side walls.
As you already understood, making your own home furniture is not only interesting, but also quite simple. You only need to arm yourself with patience, inspiration, the necessary number of necessary tools, make the necessary calculations and drawings. Based on the desired size and design it is possible to make almost any type of construction for the home. A wardrobe, desk or kitchen table, which you can easily do with your own hands, will meet all your requirements and harmoniously fit into the overall home environment.
Low cost.
The size is chosen according to individual preferences and spaciousness of the room.
Fasten the plinth to the tabletop by yourself.
Liquid stone for countertops. What is it and what does it combine with?
Installing countertops in the kitchen with their own hands
How to change the fronts on the kitchen set with your own hands?
Standard sizes of kitchen cabinets
How to arrange furniture in the kitchen
To collect the dream apartment
A set of common phrases and citations from advertising brochures.