Choosing a children's bed with a table.

Apartment buildings have a serious disadvantage - the rooms do not have extra space, while in the apartment furniture has to be resourceful. It will be about the bed with a table. The structure of the bed attic is similar to a simple bunk bed.

In both cases, there is a staircase, and a bed on the second floor.

One difference - in a two-story construction on the first tier bed, and the bed with an attic is made with a folding table. Before you buy an expensive thing, you should be well aware of its positive and negative properties, what types and features exist.

It is also necessary to understand how the installation of the entire structure.

Advantages and disadvantages

Combined furniture is widely used by many designers and has gained popularity among different categories of customers.

This design has many advantages. But, unfortunately, it has its drawbacks.

pros

1. A small amount of squaring the apartment gives great inconvenience. Therefore, the bed designed by the type of "bed attic", gained great popularity. Thanks to this decision, a new place is freed.
   
   

   The idea to combine everyday furniture and a bunk bed helped to visually increase the volume of the apartment, and free up new space.

2. The next plus is the unique design of the nursery. Unusual forms and a variety of structures will allow you to build a unique bed. In addition, the design is so simple that it is not difficult to design it for your needs. Its layout makes it possible to take into account the size of the children's room.
   
   

   Thus, it is possible to design a bed that fully satisfies all the needs of the child.

3. Combined bed has a solid multitasking. For example, children's bed with table serves as a place to sleep and play and relax. In addition to the table, it can be combined with a wardrobe, sofa, just a playroom or a sports area.
   
   

   Note that such a "hybrid" occupies the area (with the exception of height) of an ordinary bed.

Minuses

Like everything around, the bunk bed has flaws.

All the disadvantages of this design are of minor nature, but they should be given due attention.

Below are the main disadvantages and problems encountered during installation and operation.

1. The first and most significant shortcoming — risk of serious injury. Since the bed is at a considerable height, it is important that there are side walls on the side opposite to the wall.
   
   

   Sometimes because of the high mattress size of the side is not enough.

2. The next minus of a children's bunk bed is that it creates inconvenience in an apartment with small ceilings. Since not every staircase is designed for the needs of a room with a low ceiling, it is necessary to make adjustments to the design and make such furniture to order, and, therefore, to overpay your money.
   
   

   In addition to lifting, it also becomes difficult to descend.

3. The first time a bunk bed will deliver a certain inconvenience when changing bed linen.A pillow case or a duvet cover can be put on at the bottom, although this is inconvenient, but you will have to spend time on a sheet. If the mattress is high and the ceilings are low, then it’s almost impossible to fill the sheet the first time.
   
   

   But with proper skill and experience time to change clothes significantly reduced.

4. Another problem is the transportation of the bed. The bed has a rather impressive weight.
   
   

   Just so move it will not work.

Types of bed designs with a table

Computer or desk — an important part of any child or teen room. Often there is no place for a table. Modern bed loft with table will be a good help in the housing issue. Many varieties of designs can easily confuse.

Therefore, it is important to understand the types of such structures, as well as their features.

Separate several beds for teens and children with different table layouts:

• With the location of the table directly under the bed;
  
  

  Each manufacturer tries to make its products functional and at the same time interesting in appearance.

• Pull-out drawer top;
  
  

  When buying a bed you need to look at how the manufacturer has applied well-known standards in its design project.

• With a table located in the corner.
  
  

  A child on such a bed will feel comfortable if all parts are correctly and comfortably combined in it.

The classic desk, which occupies almost all the space under the bed, has become very popular. This solution is convenient in that it has a wide working area. This table allows you to focus on work, without being distracted by extraneous affairs.

Also, free space under the table, you can take drawers.

Plus in a bed with a moving out tabletop in that it has a small height. A small bed is especially suitable for small children. The risk of serious injury from the bed is almost minimal. All free space under the bed, occupied by built-in drawers. The only negative is the workplace, not large enough to complete the work.

The chair is located near the bed, and not under it, which means it takes a lot of free space.

Thanks to the engineers who designed the table in the corner, maximum quadrature saving is achieved. The vacated space can be used under the wardrobe with clothes with a small chest of drawers. But at the same time there is a place for a chair or a chair.

As is the case with the sliding top, the corner design does not have a small working space.

It does not matter which bed will be chosen, it is important not to forget about high-quality lighting.

In addition to the proposed options, you can think of your own.

Bed selection

Choosing a bed, you should consider all the needs of the child. Does he need free space, will there be a computer and how many clothes should he hang in the closet. Depending on the age of the child, his needs change. When buying a baby bed for him, it is important to remember that it will become morally obsolete in a few years, you may need to buy a new one.

There is nothing reprehensible if you take the bed “for growth”, as they buy it for a long time.

When buying a loft bed, you should consider what kind of raw materials it is made of. It is the bed material that will be the main reason for the long service of the bed.

Knowing what the furniture is made of, it will be much easier to care for it.

The main material at the best price is a plate made of pressed sawdust. The board is treated with a special coating that is easy to clean and imitates wood or any other color. Such furniture looks quite nice and adds style to the room. The advantages of such material is that the furniture is much lighter than its counterparts.

Bed made of panels with sawdust, easily installed in the right place.

But there is a significant drawback - with an aggressive environment, the furniture will deteriorate badly and will eventually become unusable.Also extruded sawdust with resin — the thing is rather fragile.

If used carelessly, broken corners may appear.

It is noteworthy that you can make a bed on the type of loft, designed with a folding table or a regular metal frame. The design has an unlimited warranty period. Strong racks well maintain mechanical impact. The maximum that can be damaged is enamel. With careless use, you can leave dents.

The disadvantage of this design is the high price.

Sizes and features

The bed of an attic has the same sizes, as well as a usual single bed, except for height. The whole point is that the bunk bed takes up as little space as possible, but at the same time it has many useful functions. The height of such structures reaches about 2 meters.

This is enough to fit the bottom, as well as comfortably sit at the top of the bed.

If you wish, based on your needs, you can develop your own design with a consultant. Order materials of the right size and get the perfect bed that satisfies all needs. You can change not only the height and width of the bed, but also choose what will be the desk. It is advisable to think of small design elements.

For example, to design several drawers or to put a wardrobe.

The final design stage will be the choice of color. The bunk bed should ideally fit the interior of the entire room.After receiving all the details, you can proceed to installation, after which the assembled bed will be ready. All you need to do is make the bed.

VIDEO: Like a loft bed saves space in the bedroom.

50 photo ideas of a children's bed with a table: