Lamels: features and their diversity

Many are wondering what is more convenient to sleep on and what is a slat? Lamels are plates made of various materials (oak, beech, birch), i.e. the main part on which the mattress is put.

Wooden slats are a reliable and practical basis for the bed

The bed structure with plates is divided into separate planks, they are very strong and each can withstand a weight of up to 40 kg. Very often slats are used for orthopedic beds.

The range of fasteners for slats is very diverse.

To plate benefit health, not harm, it is necessary to choose the mattress.

To use slats in the bed base is convenient and practical!

Lamella types

Products differ due to the following characteristics.
1. By type of base (wooden and metal base).
2. The presence of legs (either there or not).
3. The presence of fasteners (plastic, rubber, polypropylene).
4. By size (wide and narrow slats).
5. Transformers (you can choose any comfortable position).
6. Different characteristics (straight and spring lamellae).
7. The presence of stiffness regulator.
8. In length.
9. By coloring.

Oak slats are a favorite with many manufacturers of beds.

Advantages of slats

1. Elasticity (for comfortable posture in a dream).
2. Plates are light (they practically do not make sounds).
3. Increases the possibility of long-term operation of the bed.
4. Springing effect.
5. Air circulation.
6. Proper spinal support.
7. Small price.
8. Simple and easy repair.

The base of the slats for orthopedic double bed.

Lamella production

Production of plates occurs on the Austrian equipment.

Assembly option orthopedic base of the slats for a single bed.

Edged boards are purchased, different grades of AB. With the help of planed boards do the dissolution.

At any time you can replace the lamella yourself, if suddenly one of them broke.

After these operations, the board is machined. The last action is to cut the board.

The orthopedic basis for a crib with the built-in lamels.

Two types of equipment are used for processing:
1. belt-dividing machine;
2. Frame saw device.

Plastic fastening for wooden slats is most suitable in appearance.

Most often use the second method

The speed of the sawing process depends on the type of wood and the correct sharpening of the saws.

Double ortho base for the bed. Each half can be adjusted in the desired order.

Production can be divided into the following stages.
1. Material selection and quality control.
2. Preparation and drying of blanks.
3. Sort by length, width and thickness.
4. Manufacturing slats.

Double bed with wide slats in the base.

How to insert or remove the plate?

To do this, the tip must be put on a separate strip and inserted into a special slot on the frame. During this process, try to slightly bend the plates.

Each lamella can be replaced on its own, there is nothing complicated about the mounting features.

To remove the need to pull the mount out of the slot and move the end of the latoflex sideways.

Base option with lamellae that are attached with metal lamellae.

What to do if one of the slats broke?

Plates can be ordered by the piece, there is any size and material you need, the cost of the products is acceptable.

The buyer can choose the material from which the slats will be made.

Prices for 1 piece range from 80 rubles. up to 100 rubles.
The total price of lamellas from 8,000 to 20,000 thousand rubles.

The better and stronger the material for the lamellae, the higher the price tag will be installed on them.

And if you want to fix the slats, the cost will depend on the number of broken plates, for example, if 8 are broken, pay up to 800 rubles.

Plastic fasteners for slats are not inferior in reliability metal.

How to adjust the stiffness?

It is very easy and simple to do this - you need to move or push the cursors along the slat, so you can reduce or increase the rigidity in a certain area.

The more often the slats are installed, the harder will be the base of your bed.

How to choose the slats?

If you are wondering how to choose the right lamellae, we recommend to pay attention to certain characteristics and properties.

The type of fastening for lamellae should also be selected proceeding from the base of the bed.

The more lamellae are at the base, the longer the bed will last.

Version of the single bed, the base of which is installed wooden lamella.

In the double should be provided for more than 30, and for a single - more than 15 pieces.

Standard placement of slats in the base of a double bed.

The distance between the plates should be minimal.

Choose for yourself the bed, at the base of which the distance between the slats is minimal.

For an orthopedic bed with slats, you need to choose appropriate mattresses to distribute the load evenly and avoid deformation.

The orthopedic base of the lamella bed should be complemented with a quality mattress, then your sleep will be perfect.

Do not forget to pay attention to the cost of products, the material from which they are made, and most importantly - the name of the manufacturer.

Fastening of wooden lamellas is made by various methods, none of which is inferior in reliability and quality.

Should I buy "magic plates"?

Definitely worth it, because they have more pluses than minuses.

To the metal frame bed slats should be joined only with metal fasteners.

Especially at the moment there are many profitable options for their acquisition and replacement. If you are in doubt, you can always consult with experts.

Finding the perfect bed slat: VIDEO

50 photos of various lamella variants: