Bed-wardrobe do it yourself. Drawings, sizes, schemes

The room is too small and does not have the desired amount of free space, but is all the furniture in the room necessary? If you do not have the opportunity to expand the living space of your apartment, except to move to a more spacious, modern housing, you should not be upset, because there are a lot of great ideas to make Your little home is more comfortable for living!

A folding bed is a prerequisite for small apartments, when you need to accommodate everything, but do not clutter up the space.

Successful masking of furniture makes the bulky construction aesthetic, suitable for any room.

What takes up a lot of space in a room? Most people will answer that this is a sofa or an old sofa. If in your case this is the case, then after reading our article, you will not only learn how to save space by installing yourself in the room foldingshe bed, but also learn how to make her own hands.

Vertical orientation - this is the most economical option of wall placement of a berth.

An additional advantage in favor of creating a new bed will be getting rid of old sofas that have long been out of fashion. At the same time, a new, modern, comfortable folding bed will soon become your pride, because you will be happy to show your creation to friends who have come to visit!

In this design, the furniture can be of any size: single, double, non-standard.

Manufacturing and assembly

Folding bed in the assembled state looks like an ordinary compact one. cupboard for clothes, occupying the minimum amount of space in your small apartment, but thanks to otkidnohm mechanism, the bed easily unfolds, turning into a real feather bed. Yes Yes exactly! The level of comfort of sleep on a folding bed can be equated precisely to the convenience of relaxing on a luxurious soft feather bed!

A niche for furniture is a case, a wardrobe with hinged doors or a wardrobe.

The case bed can be independent piece of furniture, but most often enters the whole furniture set.

So, now, when there is no doubt about the need for this thing to appear in his apartment, you can proceed to manufacturing and assembly, but first you need to decide on the design, as well as the external design of the folding bed.

In the folded position, such a bed takes up minimal space and does not harm the spine during sleep.

It can be vertical or horizontal, but it should be borne in mind that horizontal options are usually intended for children and teenagers, representing small single beds that turn into a shelf or chest of drawers, while vertical structures can be of any dimensions.

Commode-bed can be used in the children's room or put under the wall in the living room, as a "spare tire" in case of the arrival of guests.

Simple operation allows you to use the design in the room for children.

First you need to create a drawing of the future product, which will help you navigate much faster in the assembly process, getting the desired result.You do not need the skills of a design engineer, it is enough to prepare a simple schematic drawing of the future berth, specifying the size and configuration of the structure.

Drawing wardrobe beds.

The next important step is the selection and purchase of the necessary materials and tools. The most high-quality construction will be obtained from chipboard panels, so we recommend using them as the main material. Chipboards should be purchased in specialized shopping centers, as the quality of the source material will depend on the durability of your future bed.

The base of the bed is better to do orthopedic.

Also need:

• Drel;
• Shurupovert;
• Uhelectric jigsaw;
• Rflying away;
• Mscrewdrivers;
• WITHAmoreza;
• ABOUTtkdoh mechanism.

Tools can always be purchased at specialized stores or ordered online.

So, you prudently purchased the necessary materials, tools, prepared the drawing, decided on the size of the future piece of furniture. When everything you need is ready, we begin to make furniture with our own hands. The assembly process, we conditionally divided into 4 steps.

• Step one. Need to assemble the frame cupboardand hiding a compact bed. This box consists of several parts: plinth, back wall cupboarda, as well as shelves for emphasis. All parts are attached to each other with screws or screws, which are located approximately 25 centimeters from each other. Assembled cupboard Must be installed only on flat floor.
  
  

  Assembly cabinet frame.

  

  Mount the top panel.

• Step two. We install the assembled structure, which will serve as a reliable support for the folding part of the furniture and fasten it to the wall.
  
  

  The "skeleton" of the cabinet is ready.

  

  Fasten the "skeleton" to the main wall of the apartment.

• Step three. Now we collect the base. It is a frame of boards, the height of which corresponds to the size of the future mattress. The base should ideally fit the frame we have already assembled. cupboardbut.
  
  

  On the frame fasten the slats.

  

  Thus, we obtain a structure where the mattress will be placed in the future.

• Step Four. Now that all the main parts of the structure have been assembled, we connect the base with the box, fixing the parts together with screws. Then fasten foldingoh mechanism in accordance with the attached instructions.
  
  

  Installation of bed frame using the mechanism of lifting the bed and gas springs.

  

  An important knot of a bed - in this place the biggest loads.

  

  It is better not to experiment at this stage and purchase a folding mechanism of the factory assembly.

  Thus, it will be possible to avoid unnecessary difficulties at the finishing stage of work, significantly saving time. At the final stage, we simply connect the case with other elements, after which it remains to wrap the outer part of the box with boards to make it look more like cupboardand also paint the structure to your liking.

  

  After you have connected the folding mechanism with the frame for the mattress, you can safely use such a bed.

  

  We install the facade in the form of improvised wardrobe doors. By the handles the bed will be transferred to a horizontal position.

For a more aesthetic appearance of the finished design, the entire product must be varnished in order to protect the wood from dampness and decay, if the chipboard panels were not initially processed.

The price of high-quality German and Italian lifting mechanisms is quite high, but safety is worth it.

Install the mattress and compact bed ready! Now you can enjoy the new comfortable furniture and, of course, plenty of free space in the room, which, it would seem, there was no place to take!

In the catalogs of furniture accessories spelled out on what orientation of the berth, dimensions and weight is calculated lifting mechanism.

VIDEO: Wardrobe-bed with their own hands.

Bed-wardrobe in the interior of the bedroom - 50 photo ideas: