Step by step instructions for making a box of keys from newspaper tubes
Weaving is one of the most popular types of handicraft art, which can turn them into beautiful and durable masterpieces from a variety of unnecessary newspapers. Such an occupation does not require a large investment. This article will tell you how to make articles from newspaper tubes.
Content
Technology weaving newspaper tubes
Weaving is a method of joining materials through weaving or using special knots. The use of paper blanks as a starting material began to be used relatively recently. With the help of newspaper tubes, you can make magnificent key cases, boxes, baskets of various shapes, pencil cases in the form of foxes, etc.
The main stages of weaving are the preparation of tubules. For this, sheets of a newspaper are cut into long strips 5-10 cm wide. Then a needle is placed on a strip at 45 degrees, and it is wrapped, thus a tube is formed. Then it is necessary to glue the edges of the paper bars to prevent unwinding.
Next, the plexus process takes place in a variety of schemes, of which there are a large number. And you can choose for every taste, both for beginners and for masters of their craft.
To give the product a shade, you need to pre-paint and dry the tubes. As a result, the final product can be put in a cover and supplemented with various decorative details.
How to choose paper
When choosing paper, you must first pay attention to the density. The thinner the sheet, the better, so the newspaper is the best option. But using it does not exclude the possibility of getting your hands dirty on the typography.
You can purchase clean consumer paper in bundles. There is also the possibility to purchase paper rolls or newspaper breaks at the printing houses.
From the usual office paper, you can also make wicker products. Density compared to newspaper is almost twice as much.In this regard, the tubes are a little more difficult to twist, and worse fit in the process of weaving (wrench). At the same time, the paper seams are much more noticeable when twisting.
Reference. The density of newsprint is 45-50 g / m2, and office in the region of 80g / m2.
What tools are needed to work with tubes
In order to get to work, in addition to the material, you must prepare the tools:
- Needles need to twist the tubes.
- Almost any paper glue can be used as an adhesive (for example, PVA or glue stick). The quality of the paper bars depends on the fixing properties of the glue.
- Scissors or any other tool for cutting strips.
- Brushes need for painting.
- Clothespins are designed to fix the paper during gluing.
- Paint is necessary to give the product the desired color. Paints for wool, fabrics, food dyes, etc. are well suited.
How to make caskets?
Caskets, woven with their own hands, quite beautiful and visually can not differ from the natural vine. Such products, depending on their size and shape, can be reassigned for storage: cosmetics, jewelry, keys, sewing sets, etc. For the manufacture of the box you need to prepare the material and tools in advance so that you do not distract from your work in the future.
Important. The more tubes prepared, the better.
As a bottom, you can use either a woven base or take cardboard as the base of the product. To give shape, it is recommended to use a template to which the tubes will be attached in the future. As a template, you can use almost any object (book, notebook, box, etc.). Depending on the item, you can make rectangular, square and round caskets. The process of weaving step by step is as follows.
- 16 tubules are taken, then they intersect with each other in 2 pieces.
- The process of weaving begins with the bending of each tube in a circle. The procedure continues until the desired size is reached.
- In case of shortage of tubule length, extend by adding new ones. Do not forget to fasten, tying each twig.
- After the bottom is woven, lift the ends up and begin to weave the walls. As the desired wall height is reached, the paper rods will need to be bent to acquire an aesthetic appearance of the product.
Reference. The lid for the casket from newspapers is performed on the same principle, but the external dimensions should be 1 cm larger than the main product.
With the help of newspaper tubes, you can weave a housekeeper in the form of a sovushki.
- It is necessary to make a round outline of an owl, you can take a plate as a template.
- According to the template, we derive the weaving of bars to the middle of the circle.
- Eyes are made separately. Wrap the tube in a spiral and fix it with glue at the end.
- Eyebrows are also performed separately.
- Glue the components on the woven circle.
- We decorate eyes and varnish.
The final stage is the drying and installation of metal hooks.
What to paint tubules
To select a decorative coating it is necessary to consider the properties of paints. Watercolors and gouache paints are recommended for coating blanks. Aquarelle is characterized by fading after application, and gouache has bright shades, but also needs to be diluted with water.
Acrylic is used for the finished product, and wood varnish can also be used. Acrylic gives gloss, and lacquer gives the strength of the product and the effect of this vine.
VIDEO: Master class - a box of newspaper tubes.