Creaks sofa: how to fix?
Sofa - the most popular furniture in urban apartments, therefore, important its normal performance. The sound produced by the furniture under load can greatly irritate the owners. Sometimes the squeak is peculiar to a new product, when the connections are poorly fitted, sometimes it appears after prolonged use. In each case there is a reason for the "musicality" of the subject.
When you decide to find out why the sofa is creaking, you need to get some knowledge about the design you are dealing with. The reason may be a spring block that has corroded with moisture, a wood that has rained over time, and much more.
Content
- 1 The creaking sounds of wooden structures
- 2 The creaking sounds of metal structures
- 3 Necessary materials
- 4 Required Tools
- 5 Repair process: step by step instructions
- 6 VIDEO: Eliminating the squeak of the accordion mechanism during the operation of the sofa
- 7 50 photo ideas how to eliminate the creak of the sofa
The creaking sounds of wooden structures
If an old wooden sofa squeaks, there can be several reasons.
The most likely ones are:
- cracking of any part and cracking;
- spring block deformed or bent (broken) one of the springs.
The tree loses its elasticity over time. Its structure is changing. If certain tree species are resistant to moisture (for example, aspen), then others can be quite fragile and quickly fail. Much depends on the correct use and care of the product. Both one panel and all the wooden parts can break off, if during operation the normal humidity conditions were not observed or the furniture was standing in direct sunlight.
The reason may be loosened (or too tight fasteners). The sofa at the same time makes a characteristic rattling sound. It is also possible thinning padded for softness batting or other upholstery material and other deformations.
If old wooden furniture squeaks, the spring block or its parts will need to be replaced. The first is preferable, since we are talking about the wear and tear of the material as a whole, and then another spring or part may break. The connection of individual links in this case is a rather laborious work.
One reason may be the wear of a soft cushioning material.Over time, from humidity they could rot and turn into dust, creating access for connecting elements to each other, which caused the creaking.
Too old a little harder to put in order. To establish the exact cause of the sofa should be carefully disassembled. It is likely that replacement of the elements or lubrication will be sufficient. Otherwise, you may need to buy new furniture.
The creaking sounds of metal structures
If the sofa has a metal structure, then most often the squeaks of any of the joints. Probably, the spring block has broken or one of its rings-links. Possible and the usual subsidence. The reason is often the faults of fastening - rusted or loosened bolts.
When metal furniture squeaks, it is also necessary to check the lubrication level. The sofa can make an unpleasant sound if it is uneven.
The cause of the deficiency is the deformation of the supporting structure. The sofa can have lateral parts or corners bent from long loads.
Necessary materials
If you find that the sofa is creaking badly, then this can be fixed at home. For repair will be useful:
- upholstery material;
- batting or other soft gasket;
- springs (or a block);
- PVA glue;
- plywood board;
- metal corners, etc .;
- bolts and other types of suitable fasteners;
- staples.
The sofa can be repaired with the help of various materials that are not listed, since each model is individual.
Required Tools
When the soft furniture (sofa), wooden or metal, creaks, it is necessary to equip with tools. The main aids will serve:
- screwdriver set (screwdriver with interchangeable nozzles);
- construction stapler;
- pliers.
Sofa before works need to disassemble. It is necessary to investigate the internal state of the furniture and determine the place of the creaking.
Repair process: step by step instructions
Prepare tools to fix the problem. Be prepared for the fact that it is necessary to change the seat upholstery to a new one, since the edges of the old one under the brackets or nails will wear out from time to time. When replacing the spring unit, take care in advance of its selection in size.
- Unscrew the fasteners, assess their condition: if there is any rust or erased thread, if they fit well and twisted. At detection of infringements of integrity the bolts and other elements of fastenings which failed, replace with the new. The corroded block must be uniquely replaced, since rust has already broken the structure of the metal, making it fragile. If the sound still remains, then look for another reason.
- Deformed spring block, if it is not broken and not rusted, fix it with pliers by gently compressing the rings and tightening the fasteners on the side panels.
- The sofa that sank and therefore creaks, update inside.If a batting, foam rubber or other gasket material has thinned, replace it - due to the absence of friction, the sound will not be reproduced under load. The layer should be made thick enough so that the iron parts do not touch. Greater stability will give the plywood layer, placed under the spring unit. Having made the top gasket of foam rubber or batting, gently pull upholstery material and secure it with staples using a stapler.
- If the reason for the creaking of the furniture is a cracked and cracked wood, then it is necessary to replace the part (panel or side panel, backrest, armrests). Of course, you can use a persistent adhesive, but there is no guarantee that the cracks will not go further. Wooden sofa is better to fully inspect for the detection of lacunae due to drying out. Worn material is sometimes easier not to update, but to buy a modern product instead of an old one.
- When repairing a folding sofa, it is necessary to assess the state of the transformation mechanism — the matter may be in its malfunction. This can be fixed in two ways - by fixing the elements or completely replacing them.
- If the squeak arises from uneven supports, then they should be adjusted in height. For this you can use plastic plugs or other resistant material at hand.
Sometimes the creak arises due to friction of metal parts. In iron constructions, lubrication of elements with machine oil saves the situation. Carefully drip it over the joints of the fixings, making sure that it does not touch the wooden parts and upholstery. Before adding grease, clean surfaces from dust and grease stains.
VIDEO:Eliminating the squeak of the accordion mechanism during the operation of the sofa
There is no advice on how to eliminate the creak when the load of friction against each other wooden parts of the sofa.