Regardless of the configuration, any sofa, as a rule, has a large size, because of which it is difficult to bring it into the room and move it in the room. Therefore, before transportation naturally raises the question of how to disassemble the sofa? This can be done not only by an expert, if you understand the transformation mechanism.
For disassembly you need: 1. Remove the pillows and covers. 2. Push the furniture in the middle of the room or move it as far as possible from the wall; 3. Raise the seat to see the inner frame of the corner sofa; 4. Raise the seat "sofa".
It is recommended that the fasteners be packed in a separate package, marked and securely fixed with an adhesive tape to one of the details of the sofa.
To protect parts of upholstered furniture from moisture, dust, hooks and scuffs, they are wrapped with stretch film.
In order to protect the armrests made of polished wood, you need to wrap them with corrugated cardboard or use a thin rolled foam material that is fixed with adhesive tape.
Content
Constructive parts of any sofa connect with bolts, nuts, fasteners. To disassemble most models, a simple spanner with a diameter of Ø10, 12, 14 is sufficient. Some models are assembled using fasteners, which can only be disassembled with a special tool. In this case, it is better to entrust disassembly to a specialist, otherwise using a tool that is not adapted for this can damage the frame or upholstery.
Independently disassemble the complex mechanisms of the sofa is not recommended so as not to disturb the system.
The availability and design of the sidewalls depends on the model.
Corner sofas vary in design.
The seats and backs of the sofa can be in the form of solid blocks or individual pillows.
Often fasteners are hidden under the upholstery, so you will need pliers, a flat screwdriver to pry off the brackets or pull up the studs. But to attach the upholstery back will be problematic if there is no construction stapler.
Disassembling of upholstered furniture into separate elements simplifies loading and unloading, allows compactly placing the load in the back of a car for transportation, and also helps protect it from accidental damage.
Fasteners can be visible or hidden under the upholstery material.
If the short part is made in the form of a sofa, it is equipped with a mechanism for lifting the seat, under which the laundry box is located.
Arrangement and availability of sidewalls varies depending on the model.
The sofa book should be disassembled before transportation - due to its large dimensions, this piece of furniture is difficult to carry through doorways and up stairs, it is impossible to carry in an elevator.
In most cases, to work enough to use the open-end wrench.
Before starting disassembly, inspect the inside of the sofa by lifting the seat.
The short part usually rises and contains a laundry box.
As a rule, the corner sofa consists of two beds that are attached to the corner element. One element is smaller, the second one, the main one is larger in size. There is another option when the blocks are perpendicularly located sofa. The backs and seats can be in the form of separate pillows, and can be a single non-separable unit. Many models are equipped with a box for linen in the short part of the sofa.
The sofa in the disassembled form will take a minimum of a place in a vehicle body.
In the latter case, it is also better to resort to the help of specialists who carefully dismantle the edges of the upholstery in the right places, and when assembling at a new place, they will attach the material back with a special tool.
If the armrests are made using polished wood, they are protected with corrugated cardboard or thin rolled foam material made of polymer, securing the protection with scotch tape.
To simplify your task, you need to disassemble the product into separate parts, which will simplify its loading and unloading, allowing you to conveniently place all the elements in the back of the car.
All disassembled parts must be packed, for protection corrugated cardboard, stretch film, any waterproof materials are used. Each element is packaged separately, the sidewalls are connected in pairs, everything is wrapped in a film, fixed with scotch tape. Wooden parts need to be protected with corrugated board. These measures will help keep the sofa from damage, dirt, wetting, deformation during transportation. It is easy to disassemble the sofa, and in order to also assemble it easily, it is advisable to place bolts and nuts in separate packages and sign on which part they are removed from.
All items with upholstered sofa disassembled should be wrapped in a stretch film to protect against scuffs, dirt and wetting.
After removing all available parts of the sofa, they should be wound with a stretch film.
Disassembling of upholstered furniture into separate elements simplifies loading and unloading, allows compactly placing the load in the back of a car for transportation, and also helps protect it from accidental damage.
The corner sofa is equipped with a fairly large and bulky design.
Each element of the disassembled corner sofa is packed separately (the sides are paired).
Installing the dryer for dishes in the closet
Making a sofa with your own hands
Creating Crochet Tacks: A Beginner's Guide
Brown sofa in the interior of a modern living room
How to restore the sofa with their own hands
Bed-sofa for a teenager and her features
To collect the dream apartment
