How to make a cover on the sofa with your own hands
Getting a new upholstered furniture, few people think that after a while it will lose its original appearance. The fabric will be rubbed, the armrests will start to shine, perhaps there will be difficult stains or holes. It is easy to protect the upholstery of your favorite furniture or “give a second life” to the old one. It is enough to sew a cover for the sofa with your own hands.
Content
Advantages of own products
- In comparison with restoration it is cheaper way.
- It is easy to use and easy to wash.
- Ability to create a unique custom design.
- The process does not require professional training and takes several hours.
- You can make several models and experiment with appearance.
- If next to the upholstered furniture are chairs from different sets, which are completely out of tune, they will solve the problem of additional made covers on them.
- Hand-made products are highly regarded.
Design and construction
Before you start sewing, you need to decide how the future product should look like. To do this, you need to analyze the type of your sofa. It can be double or triple, with soft or wooden sides, or no armrests at all. The most difficult is to sew a cover on the corner sofa with your own hands.
At the same time it should consist of several rectangular elements and completely cover the surface of the upholstery. It can be fixed with a rubber band. Eliminate sagging cords or braid attached to the wings, attached to the legs. Additional elements, such as frills and ribbons tightened in bows, will add elegance.
On the Internet there are many patterns to create models, reminiscent of those that are offered in stores. So, if you decide to make covers on the sofa and armchairs with your own hands, there will be a scheme. For the kit, you can add a cover on the universal armchair with elastic, hand-sewn.
Necessary materials:
- sweeping machine;
- tailoring tape or tape measure;
- ruler;
- pins;
- scissors;
- a piece of chalk or soap for marking;
- thread to match;
- and a little patience.
The most important thing that you need to sew the covers on the sofa with your own hands, this is fabric. The cover material must be durable, wear-resistant, easy to clean. For these purposes it is recommended to use:
- jacquard;
- flock;
- shinil with a plush surface;
- Pleated;
- microfiber;
- leatherette;
- eco-leather;
- natural or artificial fur.
To make the eurocover on the sofa with your own hands, you will have to purchase a more elastic fabric.
The main stages of sewing
The first step is to measure the armrests, padded stools, seats and backrests. Then create a pattern and calculate the amount of material needed. Allowances for seams of at least 7 cm should be made for every detail.
- All parts are transferred to the paper and cut. The fabric should be laid out on a hard surface. Schemes are superimposed on the material and circled around the edge with a piece of chalk or soap.
- Cut out the details of the grind lowercase seam, after which it is better to try on the product and secure it with pins. If it is small or loose, then you need to adjust the pattern or change the size of the allowances.
- After fitting to the size of the furniture, remove the extra pieces of fabric, leave only 3 cm on the allowances. Then you should sweep over and sew the edges. The resulting blanket is better to wash in cool water and iron.
- To create covers for sofas and armchairs on an elastic band with your own hands, you will have to perform several additional operations with the bottom edge. To do this, turn it inside out and draw a straight line with a pencil along which the gum will run. Then, you need to fix it parallel to the edge of the marking, fixing every 5-10 cm with pins or thread. A sewing machine is required for sewing in the elastic, which allows you to create a three-step (elastic) seam.
How to tie a case with your own hands. Step-by-step instruction
To tie a universal cover for the sofa with your own hands, you have to spend a lot of time and effort. The product can be a few interconnected canvases connected by knitting or a set of crocheted square motifs.
To create a knitted cover you will need to purchase thick threads, as well as a working tool. The pattern and color scheme is better to choose in accordance with the interior. You can use different types of thread. Just as in the previous case, you will have to make measurements of the furniture, to prepare a pattern, which you need to follow in the process of knitting the canvas.
If “motives” are used for manufacturing, it is recommended to measure the pattern area and one square. Based on the sizes obtained, calculate the number of squares and skeins of threads required.
If the product is created from knitted fabrics, it is better to calculate the surface area in advance. Once in the sewing shop, pay attention to the label thread. As a rule, it indicates two numbers corresponding to the density of knitting. Knowing them, it is not difficult to calculate (alone or by contacting an employee) the required number of skeins.
Dressing
You can decorate the finished product with bows, appliqués or stripes. For the design of armrests, decorative rope 1 cm in diameter is best suited. A wide braid or ribbon will help to emphasize the bottom.
VIDEO: how to sew a cover on the sofa with your own hands